Genuine Oak Grigsby® 3-Way lever switch for Fender Stratocaster and Telecaster
Used on USA Modern Fender Telecaster and vintage instruments.
-Fits Fender & Fender style Teles/Strats and other guitars (some modification of the control plate on Far Eastern guitars may be required check the spacing requirements below)
-Fits 1/16 in. x 1-1/16 in. slot. 1-5/8 in. center to center screw spacing. 1-3/8 in. cavity
-Single wafer configuration - 4 pole, 3 way lever switch.
-Mounting screws included (Switch Tip NOT included)
*Only tips for 'USA' switches will work with this switch.
4-Way Switch
Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high quality, 4 position switch with knob and mounting hardware. Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces fatter tone and higher output. This switch allows players to have both wiring options at once. The resulting pickup combinations are: Position 1: Bridge Pickup (standard Tele) Position 2: Bridge & Neck Pickups in Parallel (standard Tele) Position 3: Neck Pickup (standard Tele) Position 4: Bridge & Neck Pickups in Series (fatter tone than position 2 and more output than positions 1, 2, or 3) The ground must be lifted from the rhythm pickup cover and an additional ground wire added to maintain its shielding capability. Players with reverse wound, reverse polarity pickups such as Fender's Texas Specials receive the additional benefit of hum cancellation in positions 2 and 4.
RoHS Compliant
Feel Free to ask any questions
Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage.
Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging
Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.
Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging
Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.