High quality ecological acrylic water-based lacquer. Can be applied directly to styrofoam / polystyrene as well as fabrics and other sensitive surfaces. Perfect for painting surfaces made of metal, wood, ceramics, glass, wicker, cardboard, fabrics, fresh and artificial flowers, and some plastics. Lacquer without aggressive odour, environmental and human friendly. Product dedicated to artists and decorators. Wide range of application hobby and professional works: at home, garden, automotive and industry. Notice: For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart PCV use Plastic Primer DECO COLOR previously. Best result when applied at 10-25°C. Special, high covering of painted surface Intensity of colours Short drying time: 20-30 min Touch dry: 60 min; Hardened: after 24 h All the adjusts can be done up to 20 min Full water resistance is achieved till 5 days (till that time painted surface shouldn't be exposed to water) Efficiency 1,5-2 m² depending on colour and type of surface by one application Hard acrylic coating resistant to abrasion and mechanical damages Variety of colours: 28 most popular colours in RAL system Gloss finish (additionally: black and white also in matt) For indoor and outdoor use Capacity 400 ml Usage:
Before applying read carefully instructions on the container and use according to the manufacturer's recommendations.
Recommended substrate conditions:
Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600).
Method of usage:
Apply product at temperature about 10-25°C (optimum temperature for good
varnish drying). Drying time depends also on air humidity and product density.
Painting should be made in well ventilated room. Prior to commencing painting,
shake the container for about one minute, which will help mix the varnish by
the ball found inside. Perform the test spray. Apply the varnish with few thin
layers rather than one thick layer, from the distance of 25-30 centimetres.
Following applying each layer, wait a few minutes. Following the completion,
clean the nozzle. Put the container upside down, pressing the nozzle for the
period of three seconds. REMEMBER - BUY ONLY ORIGINAL AND PROVEN PRODUCTS FROM THE ONE AND THE ONLY EXCLUSIVE DISTRIBUTOR OF DECO COLOR aerosol line IN UK AUTHORIZED SUBSIDIARY COMPANY - POKO LIMITED If you are looking for more - visit our other ebay offers! |