Description:
120W +120W
Onboard front-facing IC to improve the input sensitivity, high-definition sound quality.
Name: TPA3116D2 Digital Amplifier Board
Model: XH-M543
Chip type: TPA3116D2
Working voltage: DC12-26V
Output power: 120*2W MAX
DC12V, 2*50W
DC24V, 2*120W
Signal to noise ratio: 100db
Channel: Dual channel stereo
Size; 92*68*16mm
Package Contents:1x 120Wx2 TPA3116 Dual Channel digital Power audio amplifier board
Name: TPA3116D2 Digital Amplifier Board
Model: XH-M543
Chip type: TPA3116D2
Working voltage: DC12-26V
Output power: 120*2W MAX
DC12V, 2*50W
DC24V, 2*120W
Signal to noise ratio: 100db
Channel: Dual channel stereo
Size; 92*68*16mm
Package Contents:1x 120Wx2 TPA3116 Dual Channel digital Power audio amplifier board
2x120W Bluetooth 4.0
Model:XH-M548
Chip Type:TPA3116D2
Bluetooth module:btm835/csr8635(4.0)
Transmission distance:Max 10m
Voltage:DC12-24V
Current:＞3A
Output Power:120Wx2
Efficiency ratio:＞90%
Sound track:Dual track
Size:98*79*16mm
Bluetooth module Parameters:
Specification:Bluetooth V4.0
Modulation Mode:GFSK π/4 DQPSK,8DPSK
Voltage:3.3-4.2V
Suppotr Bluetooth Protocol:HFP V1.6,HSP V1.2,A2DP V1.2,AVRCP V1.4,DI V1.3
Work Current:≤30mA
Standby Current:＜50uA
Temperature range:-40℃ to +80℃
Wireledd Transmission Distance:10m
Transmit Power:Support CLASS1/CLASS2/CLASS3 8dBm Max
Sensitivity:-80dBm＜0.1%BER
Frequency Range:2.4GHz-2.480GHz
External Interface:PIO,SPI,Audio in/out and PCM,USB
Audio Support:AAC,MPA,SBC,Stereo
Distortion Factor:≤0.1%
Module Size:21.9*14.1*1.8mm
Package included:1 x Bluetooth 4.0 Audio Receiver Digital Amplifier Board
2x50W+100W
Supply Voltage: DC 12-24V
Chip: TPA3116x2
Channel Type: 3 Channels(Left Channel, Right Channel, Subwoofer)
Output Power: 50Wx2 + 100Wx1 Subwoofer
Output Match: 4-8 ohm
Audio Output: Terminals
Frequency Response Range: 14-100KHz
SNR: 100dB
Switching Frequency: 1.2MHz
PCB Board Size: 100x70x30mm / 3.94 * 2.75 * 1.18in (L x W x H)
Weight: 113g / 3.98oz
Package Size: 13.5 x11x5cm / 5.31 x 4.33 x 1.97in (LxWxH)
Package Weight: 178g / 6.3oz
Package Included:1 x 2x50W+100WAudio Amplifier Board
2x50W
Board color: Red
PCB board material: Flame retardant epoxy resin,
Dimensions: approx. length 8cm, width 4.8cm, height 2cm
Product Parameters:
Audio type: TPA3116D2
Input voltage: DC 5-24V
Operating frequency: 20Hz-20Hz
Output type: two-channel; stereo
Precautions:
1. The power supply is best 24V, do not exceed this voltage!
2. Audio output do not short circuit to each other or short circuit to ground.
3. Please carefully check and make sure wiring is correct before power-on.
A full range of protection system with reverse power protection.
Speaker output short circuit protection.
Also with anti-shock designed switch.
Switch without "POP" sound
Package Content:1x TPA3116D2 Dual-Channel Stereo Power Amplifier Board
50WX2+100W+ Class D
Parameters :
Work modle: class D
Quiescent current: 60mA
Work efficiency: 90%
Rated output power: 100W+2x50W
Frequency response: 20Hz to 20KHz
Working voltage: DC18V to DC24V
Maximum output current: 3A
PCB SIZE：(LxW)10.4x10.3cm/4.09"x4.06"
Input mode: only bluetooth input function.
Potentiometer distance : 22MM 22MM 30MM
Note:Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Include:1x TPA3116 Class D Amplifier Board Bluetooth 2.1 100W+2x50W
Work modle: class D
Quiescent current: 60mA
Work efficiency: 90%
Rated output power: 100W+2x50W
Frequency response: 20Hz to 20KHz
Working voltage: DC18V to DC24V
Maximum output current: 3A
PCB SIZE：(LxW)10.4x10.3cm/4.09"x4.06"
Input mode: only bluetooth input function.
Potentiometer distance : 22MM 22MM 30MM
Note:Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Include:1x TPA3116 Class D Amplifier Board Bluetooth 2.1 100W+2x50W
TPA3116D 100W
Descriptions:
PWB Size:75*60 MM
Power Range: 8-25 V
Power connector is a standard 5.5 mm power jack, and most of the same power notebook
Digital amplifier can make subwoofer amplifier plate with a pre-match buffer of op amp NE5532
you can use switching power supplies, portable power supply, battery or vehicle power supply, and so on.
PWB Size:75*60 MM
Power Range: 8-25 V
Power connector is a standard 5.5 mm power jack, and most of the same power notebook
Digital amplifier can make subwoofer amplifier plate with a pre-match buffer of op amp NE5532
you can use switching power supplies, portable power supply, battery or vehicle power supply, and so on.
Packaging Include: 1x TPA3116D2 100W Digital Power Amplifier Board NE5532 OPAMP 8-25V