This kit is used to raise the height on the front of the vehicle without maxing out the Torsion bars and creating a harsh ride on the bump stops.
They also allow for greater articulation on the front end.
Doing an upper balljoint flip and fitting spacers gives you more clearance between the upper control arm and the bump stops, which will allow you to turn the torsion bar up more which will give you more lift
Intended for off road use only The kit comprises of the following
2 x 10mm ball joint spacers
6x HT bolts
6 nyloc nuts
12 washers
2x2mm camber correction shims
4x5mm camber correction shims
4x longer Top wishbone bolts with washers and nyloc nuts