Newmatics Inc.1832 Lone Star Rd, Mansfield, TX 76063 

  We offer combined shipping on all orders

Parts Sold For OFF Road / Show USE Only

PLEASE READ THE ENTIRE LISTING AND SHIPPING TERMS BEFORE BUYING

Brand New set of Front & Rear Bags Brackets with Front Universal Shock Relocator for 1960-72 Chevy C-10/C-15 trucks with Trailing arm suspension on rear. These bag brackets are made out of 3/16" Thick high strength mild steel. Rear Bag brackets can be used only with 1960-72 Chevy trucks with trailing arms on rear. These are complete bolt on brackets but shock relocation kit will require welding to frame. Just add air management to these bag brackets to finish complete install on your vehicle.

 Rear Bag Brackets Will Work Only for Chevy trucks with trailing arms on rear. Please make sure your C-10 has trailing arms on rear before you buy these bag brackets.

Note: Please make sure that your C-10 truck has trailing arms on rear otherwise the rear bag brackets will not work. Front bag brackets will require the factory shock to be removed and relocated with a tab welded at the outside of bottom A-Arm. If you have 18-20" wheel or rim size then you can use factory shocks with these front brackets. *** some cutting or modification as well as 2" drop spindles along with tubular (after market) may be required as per your tire, wheel diameter if its bigger tank 20"

Front & Rear bag brackets/ mounts can be used with any 2600 LBS bags all the way around. The front bags must be 2600LBS bags in order to lift your truck without using a lot of pressure.

Front bag brackets come with a flat plate for upper side and round cups for bottom side of A- arms. The rear bag brackets will come with cups with all thread welded in the center and lower circle plate with a washer and 4 1/2" Long bolt.

Items Included:

• A Pair of front Bolt on Bag Brackets for 1960-72 Trailing Arm trucks
• A Pair of Rear Bolt on Bag Brackets for 1960-72 Chevy C-10 Trucks with Trailing Arms on Rear.
• A Pair of Front Shock Relocation Kit with studs.
• 4- Air Lift Dominator 2600 LBS 1/2" NPT Single Port Bags (8" Diameter)
• Mounting Bolts for front & Rear Brackets (Does not include any nuts, bolts or Air Fittings for Bags)

Bracket Setup:

Front Bag Brackets:

• Remove coil spring from front side and bolt flat plate on top with bolts & nuts.
• Bottom side flat cups with hole drilled through the lower A-Arm to bolt bags and bag brackets to it. **** Bottom A- Arm may require de-humping in order for cups to bolt flat, it may depend upon the tire & wheel size.
• 2" Drop spindles can be used to drop front side extra 2", tubular control arms may be required based on type of bag brand and if rims are bigger than 20"
• Factory shocks may be used with a tab welded to lower side of A-Arm.

Note: Bottom A-Arm may not need lower cups if after market tubular arms have a plate welded to them. Must use any 2600 LBS bags on front.

Rear Bag Brackets:

• Remove spring from trailing arms on rear and bolt bag cups on top with circle plate on top of trailing arm with a hole drilled from bottom side to bolt bag with bolt (supplied) and washer at bottom.
• These bag brackets can be used with any 2600 LBS bags or 2500 LBS bags.
• A track bar may be required to keep rear axle from moving as well as squaring the frame.

Air Bags:

4 Pack AIR2B-7 Dominator D2600 single 1/2" port air bag 600PSI Max 2600 Lbs 58616 P/N Air Bag. Brand new Dominator series line of air springs: the Dominator D2600! Featuring an unprecedented maximum restrained pressure of 600PSI, 9.5" usable stroke, and a load range of 2600 lbs.; This bad boy will give you the performance you crave for. With more lift, a softer, smoother ride, and the lowest price in the industry — you can't go wrong with the new Dominator D2600!

Specification

• Dominator 2600
• Max height: 12.5"
• Compressed height: 2.8"
• Max diameter: 8"-8.5" AT 100 PSI
• Max load @ 200 psi: 2600 lbs
• Design height: 6"- 9"
• Air fitting size: 1/2"
• Top Hole: 3/8" - 16 UNC Blind
• Bottom fastener: 3/8" - 16 UNC Blind
• Mounting hole center: 2.75" (on top)
• 3 Mounting holes at bottom 1.75" apart Center to Center. Two Outer Holes 2.75" apart Center to center.

NOTE: A 4 link or 3 link kit may not be required on rear as trailing arms will support axle. All 4 2600 LBS bags can be used all the way around on the 1960-72 Chevy trucks with trailing arms on rear.

 

Tip: Do not extend the stroke of bag more than shocks as it may result in to tearing the bags from bottom or top bag plate. Any Air lift dominator 2600 LBS, Contitech 2600 LBS Bags or Firestone 224C 2600 LBS and Slam RE-7 or SS-7 can be used with the bag brackets.

Shipping:

Shipping Via UPS in all 50 States in USA. Other Expedited Shipping methods are available for this item. International Shipping Via USPS Priority Mail International and USPS Express Mail International only.

Please note we may ship this item via FedEx to certain countries based on destination country location as well total number of items purchased together.