PLEASE ORDER COLOR AND SELECT THE QUANTITY YOU NEED FROM THE DROP DOWN MENU!
(THIS LISTING IS FOR SINGLE BIKE LIGHTS ONLY) paper instructions included
ORDER EXAMPLE #1 (YOU NEED 7 ORANGE LIGHTS)
SELECT YELLOW/ORANGE COLOR
SELECT 7 QUANTITY
= 7 ORANGE BIKE LIGHTS
ORDER EXAMPLE #2 (YOU NEED 10 BLUE & 10 GREEN)
SELECT BLUE ON COLOR
THEN QTY 10
THEN ADD TO CART
SELECT GREEN ON COLOR
THEN QTY 10
THEN ADD TO CART
= 20 BIKE LIGHTS
THEN CHECKOUT AS NORMAL
INSTALLING INSTRUCTIONS
1. Unscrew the middle of the plastic joint.
2. Remove all battery paper/plastic guards.
3. Screw back together gently (Do not screw on too tight or too loose).
4. Test motion sensor by waving around to see LED flashing light.
5. Screw on to your valve stem and tighten securely.
These lights are motion activated only to save on battery life. (The batteries are rated for 24-48 hours if were running continuous)
The batteries must face in proper same direction with AG10 facing stem.
PLEASE DO NOT OVER TIGHTEN. There is a motion sensor inside and you must only tighten at the appropriate amount.
We have full (60 DAY WARRANTY) on all products. (Except the batteries)
Tire valve cap lights screw onto the valve stem of your car, bicycles or motorcycle in seconds Universal fitment and easy to install with no special wires, can be easily installed and removed. Fits most valves of road, mountain bicycles, motocycles and cars. Bright LED will turn on while the vehicle is moving and off when the vehicle is stopped. They flash more than they are solid lighting. Tire valve cap lights screw onto the valve stem of your car, bicycles or motorcycle in seconds.
Powered by 3 x AG10 batteries.(INCLUDED)
Size: 7cm x 1.7cm x 1.7cm.
Fit for woods/dunlop valve, schrader valve.
BUT NOT for presta valve.
Note: Light flashing and different displays may cause the color of the item in the picture a little different from the real thing.
|