Welcome to our oil seal store. Huge amount of different
dimensions and materials are on stock!! Don´t hasitate to contact us. We also
have o-ring store, bearing store,chain store,
hydraulic and pneumatic seals store, belt store, etc - we
can send together. Most of oil seals
are on stock, so we are usually shipping within 2 bussiness days.
Longer handling time 10-20 days occures just on sold out
items.
We can also use UPS
express shipping. Shipping rates are: UPS to USA 30USD,
UPS to Europe, U.K, Germany, France
20USD,
UPS to N.a S.America, Canada, Mexico, Brazil, Asia, China,
Japan, Australia 50USD
|
K07 is a single acting wiper ensuring that foreign
particles are not introduced into the hydraulic systems , avoiding wear and
damage to all the internal components including seals
PRODUCT ADVANTAGES
• Superior wiping performance
• Axially open , easy-construction groove
• Used in heavy conditions by the good mechanical properties of PU
material.
• Secure seating , press fitting into the housing
• Space-saving construction
APPLICATION
Light and medium duty construction machinery , fork-lift trucks , agricultural
machinery , support cylinders and standard cylinders.
|
|
MATERIAL
|
|
CODE
|
|
NBR
|
90 SHORE A
|
NB9001
|
|
|
STEEL
|
ST 37
|
FE 9901
|
|
|
|
OPERATING
CONDITIONS
|
|
MEDIA
|
Mineral oils(DIN 51524)
|
HFA and HFB
|
HFC
|
|
TEMPERATURE
|
-30°C +105°C
|
+5°C +60°C
|
-30°C +60°C
|
|
SPEED
|
≤1.0 m/sn
|
≤1.0 m/sn
|
≤1.0 m/sn
|
|
Note: The above data are maximum values and
cannot be used at the same time.
|
|
|
|
|
SURFACE ROUGHNESS
|
Ra
|
Rmax
|
|
Sliding Surface Ød
|
≤0.4 μm
|
≤3.2 μm
|
|
Groove Base ØD
|
≤1.6 μm
|
≤10 μm
|
|
Groove Flanks S1
|
≤3.2 μm
|
≤16 μm
|
|
INSTALLATION
Wiper is pressed into axially open housings. Special equipment should be
used during this process. It is very important that the assembly tools must
be of soft material and have no sharp edges. Before installation the wiper
must be oiled with system oil.
NOTES
K07 wipers are single acting and can be used with combination of all rod
sealing elements. K07 wipers can be produced on requests in FKM material
for special applications that require high temperatures.
|
|
|
|
|
|
PU
|
92 SHORE A
|
PU9201
|
|
STEEL
|
ST 37
|
FE 9901
|
|
|
OPERATING CONDITIONS
|
|
MEDIA
|
Mineral oils (DIN 51524)
|
HFA and HFB
|
HFC
|
|
TEMPERATURE
|
-30°C +100°C
|
+5°C +50°C
|
-30°C +40°C
|
|
SPEED
|
≤1.0 m/sn
|
≤1.0 m/sn
|
≤1.0 m/sn
|
|
Note: The above data are maximum values and
cannot be used at the same time.
|
|
|
|
|