Welcome to our oil seal store. Huge amount of different
dimensions and materials are on stock!! Don´t hasitate to contact us. We also
have o-ring store, bearing store,chain store,
hydraulic and pneumatic seals store, belt store, etc - we
can send together. Most of oil seals
are on stock, so we are usually shipping within 2 bussiness days.
Longer handling time 10-20 days occures just on sold out
items.
We can also use UPS
express shipping. Shipping rates are: UPS to USA 30USD,
UPS to Europe, U.K, Germany, France
20USD,
UPS to N.a S.America, Canada, Mexico, Brazil, Asia, China,
Japan, Australia 50USD
K18 is a five piece double acting compact seal
which consists of one elastomeric nitrile rubber sealing element , two
polyester elastomer back-up rings on both sides to prevent extrusion into
the sealing gap and two special profiled guide rings produced from
thermoplastic to absorb transverse forces.
PRODUCT
ADVANTAGES
• Superior sealing performance
• Economic sealing and guiding solution
• Simple groove design , one-piece piston possible
• Long service life
• Simple snap installation
APPLICATION
Construction machinery , fork-lift trucks , injection moulding machines ,
agricultural machinery , cranes and standard cylinders.
|
MATERIAL
|
|
CODE
|
NBR
|
80 SHORE A
|
NB8001
|
|
TPE
|
|
TP7301
|
|
POM
|
|
PM9901
|
|
|
|
MEDIA
|
Mineral oils (DIN 51524)
|
HFA and HFB
|
HFC
|
TEMPERATURE
|
-30°C +105°C
|
+5°C +60°C
|
-30°C +60°C
|
PRESSURE
|
≤400 Bar
|
≤400 Bar
|
≤400 Bar
|
SPEED
|
≤0.5 m/sn
|
≤0.5 m/sn
|
≤0.5 m/sn
|
Note:
The above data are maximum values and cannot be used at the same time.
|
|
|
|
SURFACE ROUGHNESS
|
Ra
|
Rmax
|
Sliding Surface ØD
|
≤0.4 μm
|
≤4.0 μm
|
Groove Base Ød
|
≤1.6 μm
|
≤6.3 μm
|
Groove Flanks B
|
≤3.2 μm
|
≤16 μm
|
Note: It is recommended to have 50% to 90% of
the working surface material contact area value.
|
INSTALLATION
Easily assembled into one-piece piston because the back-up rings and
guide rings are been produced in split forms. It is very important that
the assembly tools must be of soft material and have no sharp edges.
Before installation the sealing element must be oiled with system oil.
|
NOTES
For special applications that require high temperatures , piston seal is
manufactured in FKM and PTFE material.
|
|
|