Shop Categories
OtherTIG TORCH SETSAIR-COOLED TIG TORCH SETSAIR-COOLED 1-PIECE INLINEAIR-COOLED 1-PIECE DINSEAIR-COOLED 1-PIECE STUD ADAPTAIR-COOLED 2-PIECE TERMINALAIR-COOLED 2-PIECE LENCO/TWECOAIR-COOLED 2-PIECE DINSEWATER-COOLED TIG TORCH SETSWATER-COOLED INLINEWATER-COOLED DINSEWATER-COOLED STUD ADAPTTIG TORCHES WITH ON/OFF SWITCHTIG TORCH PARTS & ACCESSORIESAIR-COOLED HEADS AND BODIESWATER-COOLED HEAD AND BODIESAIR-COOLED CABLESWATER-COOLED CABLES AND HOSESAIR-COOLED WELDER CONNECTORSWATER-COOLED WELDER CONNECTORSARGON HOSE ACCESSORIESWATER HOSE ACCESSORIESCABLE COVERSTIG TORCH CONSUMABLESFOR 9-20-25 SERIES TORCHESACCESSORY KITSBACK CAPSGASKETS/INSULATORSCOLLETSCOLLET BODIESNOZZLES - STANDARDNOZZLES - GAS LENSNOZZLES - LARGE DIAM. GAS LENSFOR 17-18-26 SERIES TORCHESACCESSORY KITSBACK CAPSGASKETS/INSULATORSCOLLETSCOLLET BODIESNOZZLES - STANDARDNOZZLES - GAS LENSNOZZLES - LARGE DIAM. GAS LENSNOZZLES - STUBBYARGON-SAVING SERIESMIG GUNSMIG GUNSCOMPATIBLE WITH LINCOLN/TWECOCOMPATIBLE WITH MILLERCOMPATIBLE WITH EUROMIG GUN CONSUMABLES AND PARTSREPLACEMENT FOR TWECO/LINCOLNLIN 100L & TWECO MINI #1LIN 200 TO 400 & TWECO #2, #4LIN 300 AND 400 & TWECO #3, #4ACCESSORY KITSREPLACEMENT FOR MILLERMILLER M10, M15/HOBART H9, H10MILLER M-25 & M-40ACCESSORY KITSGAS EQUIPMENTOTHER GAS REGULATORSGAUGES WITH 1/4" NPT THREADGAUGES WITH 1/8" NPT THREADCHROME PLATED GAUGESCO2 GAUGESOXYFUEL WELDING/BRAZING TIPSOXYFUEL CUTTING TIPSOXYFUEL HEATING TIPSWELDING & CUTTING EQUIPMENTPLASMA TORCHESPLASMA PARTS & CONSUMABLESPLASMA TORCHESFILLER METALSTITANIUMMAPP & PROPANE BRAZING TORCHESWELDING CABLEELECTRODES OVENS/DRYERSMAGNETIC HOLDERSGRINDING & CUTTING WHEELSFOR STEELFOR STAINLESS STEELFOR ALUMINUMFOR STONE/MANSONRYMULTI-PURPOSEGLOVES AND PROTECTIVE APPARELWELDING HELMETSCHANNEL DRAINSPVC VALVESWELDING FLUXES AND CHEMICALSBRAZING FLUXESWELDING CABLE ASSEMBLIES
Helpful Links
SÜA - Aluminum E4043 Stick Electrode Rod 1/8" x 14" - (0.5 Lb = 16 Rods)
SÜA - Aluminum E4043 Stick Electrode Rod 1/8" x 14" - (0.5 Lb = 16 Rods)
Item Description
- E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with a minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes.
- ***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***
- Can be used as a SMAW-stick electrode or as an oxyacetylene brazing rod. Very easy to use with an exceptionally stable arc, operating at low amperages with a very minimal amount of spatter or fumes. Weld deposits are strong, dense, porosity-free with good color match and corrosion resistance."
- Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates.
- These Electrodes are 14 inches long and are available in Sizes: 3/32", 1/8" and 5/32" - Available Packages: 0.5 Lb, 1 Lb and 2 Lb - Select your option from the Size Menu :
Instructions: Clean the weld area thoroughly so it is not contaminated with iron, rust, oil, grease, etc. Thicker sections should be beveled to a 60° Vee. Align the parts to be welded by tacking the joint(s). Preheating thicker sections to 350°F will flatten the weld bead and reduce the amperage needed. Use DC+ (reverse polarity), hold the electrode at a 90° angle to the work piece, maintain a short arc length and move rapidly. The weaving technique is not recommended because of the faster travel speeds required when welding aluminum. Allow the part to air cool and remove all slag using a stainless steel brush before making additional passes. When finished, allow the part to cool down to about 200ºF and remove flux residue with warm water and a stiff stainless steel brush. A 10% sulfuric acid and hot water solution applied with a stainless steel brush will give a clean, more polished appearance. Notes: When using an oxyacetylene torch to braze, set torch to a carbonizing flame and carbonize the part, then readjust to a neutral flame and heat the entire part until the carbon residues fade; then apply E4043.
About Us
Mundaka Technologies, Inc is a US-based company with an inherited expertise of more than 40 years in the welding, cutting and industrial gases business. We serve the United States and the Latin American markets from our facilities in Fort Lauderdale FL. All of our products are selected with quality and affordability in mind. Our customer service team is always available and committed to answering our client's questions and needs. NO Answering Machines, NO Excuses.
Payment
We accept all major payment methods: PayPal, Visa, MasterCard, AMEX, Discover, and Bank Transfers. We charge 7% sales tax on all orders shipping within the State of Florida. We sell with tax exemption if we are provided by the customer with a valid Florida resale certificate.
Shipping
We ship the same business day for orders placed before 12:00 EST. USPS Priority Mail (1-3 days), FedEx and UPS Ground (1-5 days), are our preferred shipping methods and delivery dates may vary according to tho the final destination of the order. For smaller and lighter items we use USPS First Class (1-4 days). We offer free shipping to the 48 contiguous continental states.
Returns
If you are not happy with your product, just request a return on eBay or get in contact with us, We will accept your return and refund your payment, no questions asked!. If you changed your mind or bought a product by mistake, Just send it back! we will refund your payment. Is the product that you bought does not fit your current equipment, No problem, just call us and we will help you to find the right equipment for you and exchange it. We are committed to providing our customers with a solution.
Disclaimer
Mundaka Technologies Inc offers products that can operate at high temperature, high pressure, and high voltage/amperage. These products are intended for professional or trained users. Mundaka Technologies does NOT sell any products intended to diagnose, treat, cure, or prevent any disease and the products bought from Mundaka Technologies Inc should never be used as a reference to measure or dosage medical oxygen or any other medical gases or substances to humans or animals. Mundaka Technologies, Inc. assumes no liability for misuses of this products. Some of the products offered here might be described as "Compatible with" other manufacturer´s equipment and brands. It is not in the Mundaka Technologies Inc intentions to resemble, copy, counterfeit or violate trademarks, patents, brands or any other form of intellectual property owned by other companies not affiliated, associated, authorized, endorsed by, or in any way officially connected to Mundaka Technologies Inc.
More Items!
E6010 Deep Penetrating / Fast Freeze Welding Electrode 14" x 1/8" (PACK: 4.4 Lb)
$27.26
E6010 Deep Penetrating / Fast Freeze Welding Electrode 14" x 1/8" (PACK 8.8 LB)
$35.31
E6010 Deep Penetrating / Fast Freeze Welding Electrode 14" x 1/8" (PACK: 22 LB)
$62.33
EFeMn-A Hardfacing Low Hidrogen High Manganese Electrode 16" x 5/32" - (11 LBS)
$56.93
Powered by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.