Charnwood PFK04 Frame Joining Kit
The latest addition to our range of picture framing tools allowing the
hobby framer or artist to be able to join professional looking frames at
home.
The frame clamp has a quick action mechanism to quickly and securely
hold the two mitred pieces of moulding. Once clamped, the corner is
turned upside down and positioned on the non-slip base and up against
the fence for accurate location of the wedge. The fence itself can be
positioned to allow for any sized picture frame moulding, up to 75mm
wide, with a front and back locating stop which can be set when using
wider mouldings which require two wedges in each corner.
When working with taller mouldings, up to 100mm, it is possible to
perform an operation known as stacking, where two wedges are inserted on
top of each other. The second wedge pushes the first one in deeper so
that inserting 2 x 10mm height wedges is the equivalent of a 20mm wedge.
The driver for inserting the wedges has a square shaped magnetic tip
which securely holds the next wedge in place. The hand lever is pushed
down, which does not require much force and can be operated by anybody,
Until the wedge is fully inserted and flush with the back of the frame.
Once all 4 corners have been joined the frame is ready for the artwork
to be put in, the backing board secured in place, using our T225 Tab
Driver, and then hung on the wall. We include a FREE hardware kit to
provide the finishing touch.
FREE 266 Piece Hardware Kit;
100 x 7mm Wedges
100 x 10mm Wedges
5m Picture Hanging Wire
8 x Screw Eyes
8 x D Rings
8 x Screw Rings
6 x Large Wall Hook
4 x Small wall hook
10 x Wood screw
20 x Masonry Nail
1 x Frame leveler (Spirit Level)OFFSHORE DELIVERIES WILL INCUR A £10 SURCHARGE