Our cables are:
- Made in Japan, stainless steeel
- Polyurethane coated (very robust and durable in all road/weather conditions)
- Rated at 300lbs linear tension
- Softer than the originals (easier to install on the pulley unlike the green Home Depot cable used on 3rd gen repairs.)
When you buy our pre-made/exact cut stainless cable set, you will receive:
- One short, one long pre-cut coated stainless steel cable kit with soldered ends.
- Four cable-end ferrules (you will need a crimping tool which can be obtained from any hardware store)
- One piece of tester cable to test your crimping tool and resulting ferrule shapes.
- 6 page (3 letter sheet) printed detailed instructions with B/W pictures.
IF YOU SHOULD HAVE ANY QUESTIONS OR DIFFICULTIES PLEASE WRITE US. OUR TURN AROUND TIME IS VERY FAST.
ON THIS ITEM, THERE IS NO "DEFECTIVE OR DOES NOT FIT" CABLES CLAIM; MEANING THAT THE INSTALLER MUST BE QUALIFIED AND MUST KNOW THE INSTALLATION STEPS WELL; EXPERIENCE IS HELPFUL.
IN CASE OF RETURNING A USED/DAMAGED CABLE SET, WE MIGHT DEDUCT 25% DEPENDING ON THE PARTS RETURNED FOR MANUFACTURING.
AGAIN, IF YOU ARE UNSURE OF THE PROCESS, PLEASE COMMUNICATE WITH US SINCE WE ALSO INSTALL THE CABLES PROPERLY AS A SERVICE. YOUR ORIGINAL KIT PURCHASE WILL BE CREDITED TOWARDS THE SERVICE PRICE ($129 minus $79)
LASTLY NOTE THAT THE CABLES ARE NOT "SHORT OR LONG", IF YOU THINK THAT, AT THE END, YOU DID THE INSTALLATION WRONG!
THANK YOU FOR YOUR PURCHASE AND WE HOPE THAT OUR SOLUTION SAVES YOU A LOT.