TIMLOC 1168 White DROP IN 562x662mm Loft Access Door Hatch Trap - INSULATED
- £41.95
- |
Timloc 1168 Drop In Loft Access Door
Features and benefits
• Purpose made product saves time and money compared to traditional joiner-made timber loft access doors
• Standard and higher U value insulation performances available
• Excellent aesthetic appearance
• Factory finished and ready to fit straight from the box
• Insulated door panel
• Incorporates integral draught/vapour seal
• Incorporates two twist operated catches to secure the door panel and prevent uplift
• Maintenance free, no need to paint
Quality
• Satisfies all NHBC requirements
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001
• Complies with Building Reg. document L1A & L2A (2013 Edition)
• Meets all relevant British Standards
Material and colour choice
• The frame is a one-piece injection moulding in polypropylene
• The door panel is a one-piece injection moulding in polypropylene
• Insulation is CFC free expanded polystyrene foam
• Available in white only
Installation adviceceiling joists spaced at 600mm centres which provide a clear joist opening width of 562mm
• If the roof design does not provide this joist opening width, a suitable opening must be formed
• Trimmers must be installed across the ends of the frame.
These should be spaced to give a clear opening length of 665mm
• The frame fixes with ten screws, three through each side and two through each end
• Fit the loft access door after the ceiling has been plasterboarded and skimmed
• The product is designed to fit between 38mm thick trussed
Timloc 1168 Drop In Loft Access Door
Features and benefits
• Purpose made product saves time and money compared to traditional joiner-made timber loft access doors
• Standard and higher U value insulation performances available
• Excellent aesthetic appearance
• Factory finished and ready to fit straight from the box
• Insulated door panel
• Incorporates integral draught/vapour seal
• Incorporates two twist operated catches to secure the door panel and prevent uplift
• Maintenance free, no need to paint
Quality
• Satisfies all NHBC requirements
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001
• Complies with Building Reg. document L1A & L2A (2013 Edition)
• Meets all relevant British Standards
Material and colour choice
• The frame is a one-piece injection moulding in polypropylene
• The door panel is a one-piece injection moulding in polypropylene
• Insulation is CFC free expanded polystyrene foam
• Available in white only
Installation advice
- ceiling joists spaced at 600mm centres which provide a clear joist opening width of 562mm
- If the roof design does not provide this joist opening width, a suitable opening must be formed
- Trimmers must be installed across the ends of the frame.
These should be spaced to give a clear opening length of 665mm
• The frame fixes with ten screws, three through each side and two through each end
• Fit the loft access door after the ceiling has been plasterboarded and skimmed
• The product is designed to fit between 38mm thick trussed