Product Description
Note:
1. The window film works only on flat, clean, and smooth surfaces. It will not stick on plastic, broken or uneven surfaces.
2. Please do not apply the film to double pane windows, as the temperature changes might cause the windows to crack.
Package Included: 1 Roll of Rabbitgoo Window Film
The instruction manual is sealed together with the film roll.
Installation Instructions:
1. Measure the surface and cut the privacy film. Leave an extra inch margin on each side for an easy adjustment.
2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.
3. Peel off the transparent backing film along a short side. (Very Important!!!)
4. Spray a lot of water or soapy water both on the smooth side of the window privacy film and the window, then install the window film onto the window.
5. Use the soft towel or squeegee to wipe the privacy film back and forth to make sure that the bubbles and water have been totally removed.
6. Trim off the margins and use a cloth to flatten out the film. Here you go!
How to Peel Off the Clear Backing Film:
Method 1 - Wet a corner of the film and twist it for a while to loosen the attachment between the window film and the backing film;
Method 2 - Attach two pieces of scotch tape to both sides of the window film corner. Separate the clear backing film from the window film by peeling off the tapes.
Some useful tips for you:
When applying in cold weather: before installation, blow hot air to the film using a hairdryer to soften the film up (Heat Resistant up to 176℉)
Affix a tape on a corner of the backside (the smooth side) to quickly remove the backing film.