WHITE INLINE ROCKER TORPEDO SWITCH DIY LAMP LED VIVARIUM

This product data sheet is originally written in English.


DIY INLINE WHITE SWITCH FOR AC OR DC APPLICATION
Ideal for making your own switch cable assembly, making on/off
switch for your LED Strips - vivarium lighting - lamps and other
low current applications.

Switch body has connections allowing either solder or crimp
connection of wires.


Specifications :-
MAX 3 Amps @ 240V AC or 3 Amps for DC Voltage up to 30 VDC

Suitable for round sheathed cable up to 4mm diameter or oval/flat
cable of max 6mm x 4mm (including figure 8 cable )

Physical dimensions :-
Length - 60mm
Width - 19mm
Height to top of rocker switch - 21mm
Height of switch only - 15mm

Switch top & bottom fit together and rely on compression of 2 parts to seal switch

Please ensure LIVE wire is connected to either end of rocker switch assembly only,
if using for DC then negative wire must be run in tunnel under rocker switch, if using
for AC both Neutral and Earth wires must be run in this tunnel space (If wire ends
are soldered together for neutral and earth then please also ensure join is fully
insulated to ensure no possibility of shorting)

As with all electrical installation work - only undertake if you are confident to do so,
and never exceed stated maximum ratings for this item. If in any doubt consult a
qualified person for installation or fitting advice.

Any cable/wire or other items shown in pictures are not included with this item -
switch will be supplied as Top, Bottom and switch assembly unassembled in a
clear gripseal bag for user assembly

Also available in Black

** Telling you as it is - In our opinion, due to the nature of the plastic used in the body of the switch it does appear to have a slight pinky tinge... So not a pure as the driven snow white! **
Switch top & bottom fit together and rely on compression of 2 parts to seal switch Please ensure LIVE wire is connected to either end of rocker switch assembly only, if using for DC then negative wire must be run in tunnel under rocker switch, if using for AC both Neutral and Earth wires must be run in this tunnel space (If wire ends are soldered together for neutral and earth then please also ensure join is fully As with all electrical installation work - only undertake if you are confident to do so, and never exceed stated maximum ratings for this item. If in any doubt consult a Any cable/wire or other items shown in pictures are not included with this item - ** Telling you as it is - In our opinion, due to the nature of the plastic used in the body of the switch it does appear to
Protection Against Liquids Not Protected
Unit Type Unit
MPN P2GSWITCH.INLINE.DIYWH
Brand P2G
Current Type AC/DC
Termination Type Solder or Crimp
Switch Action Maintained