iSwitch Design is proud to
introduce KONOQ, our second-generation Luxury Crystal Glass Panel
Touch Switch collection.
Reflecting our expertise and
valuable customer feedbacks, every detail of KONOQ has been
designed to look and feel great.
We believe your home or work environment
deserves quality right down the finest detail.
Main advantages of KONOQ over competition:
KONOQ is UKCA, CE and ROHS certified , which comes with 2 year manufacturing guarantee and London based support.
KONOQ has 50ms touch rate response, fastest in the
market to provide smart response feeling like iPhone touch.
KONOQ has soft backlight to indicate
the position and operation in darkness. Simply red is on, green is off.
KONOQ remote units comes with stylish and 30% bigger
remote controller than typical ones in the market.
KONOQ dimmer units have stepless dimming function,
which is uninterruptible and light softer.
KONOQ is built with MCU intelligent chip to achieve
increased efficiency and intelligent control.
Way : Same light can be controlled more than one switch, options are 1 or 2 way.
If you only control the light (or set of lights) from only one switch you require 1 way switch.
However, if you want to control the lights from more than one switches you require to have 2 way switch
All Konoq 2 way switches can also be used as an intermediate switch and can be configured to work 3 or 4 way accordingly. (for instance stairs; one switch at the bottom of the stairs and one switch on the top of the stairs control the same light)
Wiring diagram and synchronization instructions will be provided in your pack.
Pls note that Konoq 2 way light switches communicate with each other via electronic signals so, it is not possible to use these switches with mechanical switches.
Switch Types : Please see the table and descriptions below to help you decide which switch is the most suitable for you.
If you are in doubt, please do not hesitate to contact us.
1. Touch On/Off: It allows user to turn the light On/Off by touch only. No Dimming
2. Touch Dimmer: It allows user to turn the light On/Off as well as dim the light by touch only.
3. Remote On/Off: It allows user to turn the light On/Off by touch as well as with remote control. No Dimming
4. Remote Dimmer: It allows user to turn the light On/Off as well as dim up & down the light by remote controller or touc
Please note that 1 & 2 gang dimmer units are controlled by one remote controller and 3 gang dimmer units are controlled by two remote controllers.
Please check working principle in the next section.
5. WIFI via Broadlink On/Off: It allows user to turn the light On/Off the light by phone application via Broadlink RM Pro device.
Broadlink RM PRO Device is required to make switch work over WIFI or 4G, which is sold separately in our listing.
Alongside WIFI control voice control of Konoq switches via Amazon Alexa or Google Assistant is possible.
Step by step instructions for synchronization of Konoq switches with Broadlink RM Pro and Alexa/Google Assistant will be provided with your order.
6. WIFI via Broadlink Dimmer: It allows user to turn the light On/Off as well as dim the light by by phone application via Broadlink RM Pro device.
Broadlink RM PRO Device is required to make switch work over WIFI or 4G, which is sold separately in our listing.
Alongside WIFI control voice control of Konoq switches via Amazon Alexa or Google Assistant is possible.
Step by step instructions for synchronization of Konoq switches with Broadlink RM Pro and Alexa/Google Assistant will be provided with your order.
Please note that neutral wiring is required.
2 Way operation is possible by programming. (only between WIFI integrated on/off switches)
8. WIFI Integrated Dimmer: It allows user to turn the light On/Off as well as dim the light by any device with WIFI or 4G compatibility.
Please note that neutral wiring is required.
Please check working principle in the next section.
9. Wall Remote Controller for On/Off 1 Way Units: Remote controller built same design of the actual switch, which sticks to the wall
without any wiring. It works the same as remote controller, which allows controlling Remote On/Off 1 Way switches as 2 way without
requirement of any wiring. Please note that it does not work as switch alone, which only works with Konoq on/off 1 way type.
10. Remote Controller for Dimmer Units: Spare/Extra 4 button remote controller, which works with remote enabled dimmer units only.
More than one remote controller can control the same switch if desired.
11. Remote Controller for On/Off Units: Spare/Extra 4 button remote controller, which works with remote enabled on/off units only (except 2 way, pls check below).
More than one remote controller can control the same switch if desired.
12. Remote Controller for 2 Way Units: Spare/Extra 4 button remote controller, which works with remote enabled 2 way units only.
More than one remote controller can control the same switch if desired.
13. BroadLink RM4 Device: Allows you control your Konoq WIFI switches from anywhere via WIFI or 4G.
Subject to your WIFI coverage you will only require one Broadlink device per household to control all compatible Konoq range.
The Broadlink RM4 Device lets you control more than just your Konoq Switches, which allows you to control any Infrared Device in your home such as your TV, Air con, Music System and any other remote controlled device.
Please note that flickering problems might occur when using LED lights below 5 watt or low quality LED lights.
Our LED adapter addresses the majority of these cases. One LED adapter is provided with each order.
For details and extra adapters, please visit our related listing 323642246902.
Dimensions:
Installation:
No need to change existing wiring.
Related installation manual and wiring map is included in each pack. In general installation ports are:
L: Live (usually brown cable)
L1, L2, L3: Light/set of lights (usually blue cable)
B: Common/two way communication (usually grey cable)
A: Live connection between master unit and slave unit (required if there is no common cable for 2+ ways system)
N: Neutral only for WIFI Integrated type requires Neutral wiring
On/Off Models:
Touch the circle once to turn on (backlight is red), touch the circle again to turn off (backlight is green).
Dimmer Models:
Touch the circle once to turn on and off.
Touch and hold the circle to dim up gradually
and repeat the same for dim down gradually.
With intelligent memory function, the next touch will remember the brightness of the last lamp closure
Backlight will be red when loads on.
Please note that only 1 Gang WIFI Integrated Dimmer model comes with 3 circles to control the same light.
1st Circle: Dim Up , 2nd Circle : on/off and 3rd Circle: Dim Down
As perfect match to our switch collection, please check Konoq Luxury Crystal Glass Panel Screwless Socket collection.
(Please search eBay item number 322128748213 for details)
2) Press either A, B or C on remote controller depending on the button you want to work with that gang. Once you've pair the gang(s) that button ( A,B or C) on the remote will only work with that gang.
(To switch all gangs off press the button D on the remote)
1gang dimmer is controlled with one remote controller.
Button A: Switch On&Off
Button B: Dim Up
Button C: Dim Down
Button D: Switch Off.
2gang dimmer is controlled with one remote controller.
Button A: Switch On&Off First Gang
Button B: Switch On&Off Second Gang
Button C: Dim Up
Button D: Dim Down
In order to control first gang, Press A and then button C and button D to control dim.
In order to control second gang, Press B and then button C and button D to control dim.
3gang dimmer is controlled with two remote controllers.
First Remote Controller operates first gang:
Button A: Switch On&Off
Button B: Dim Up
Button C: Dim Down
Button D: Switch Off
Second Remote Controller operates second and third gangs.
Button A: Switch On&Off Second Gang
Button B: Switch On&Off Third Gang
Button C: Dim Up
Button D: Dim Down
In order to control second gang, Press A and then button C and button D to control dim.
In order to control third gang, Press B and then button C and button D to control dim.
2 way and intermediate wiring notes:
Please follow the Wiring diagram correctly when connecting 2 Way switches.
B to B wiring is the communication line (common line)
A to A wiring is only required if live is shared between master and slave switches (leave blank if both switches have own live).
Do not cross A and B ports (if cross, switches could be damaged)
Any of the gang between master and slave switch could be paired. Leave L1/L2/L3 blank on slave switch for paired gangs.
If a light is connected to any one of the terminals on master switch the corresponding load on the slave switch is kept empty.
However, if slave switch is sharing live from master switch (A to A), lights (L1/L2/L3) has to be connected to master switch.
2 way and intermediate pairing process:
1) Press and hold on a gang on the master switch for 5 seconds until the circle is flashing.
2) Within 60 seconds touch (not hold) the correspondent gang on the second switch you want to pair with master switch.
Study completed when you hear a sound of “drip”, background lights flashing completed.
You can pair gangs in any order such as (L1 with L1 or L2 with L3)
3) Repeat the process for all gangs you want. Unpaired gangs will work as one way.
Un-pairing: Press and hold the gang for 10 seconds until hearing the second sound of "drip" or second background lights flashing.
PLEASE NOTE WE WOULD RECOMMEND ALL OUR PRODUCTS TO BE INSTALLED BY CERTIFIED ELECTRICIAN.
THIS IS BOTH FOR YOUR SAFETY AND THE PROPER USE OF THE SWITCH.
Shipping:
We do our best to ship your order within one business day after clear payment. Please check expected delivery depends on the shipment method you choose. We ship all specified Ebay Global Shipping Locations and the UK but if you are buying from following locations below,
please contact us before you purchase as it might occur additional delivery charges;
CHANNEL ISLANDS, ISLE OF WIGHT, ISLE OF MAN, SCILLY ISLES, SCOTTISH HIGHLANDS, SCOTTISH ISLANDS, NORTHERN IRELAND
Return Policy:
We accept a return within 30 days.
Buyer is responsible for return postage unless the item is faulty.
The return item has to be in original brand new resalable condition.
We will not accept a return, if the item is installed or not complete.
Please contact us for the extended manufacturing warranty.