Self Adhesive Sticker

Sticker Design: Select From Drop Down Box

Sticker Quantity: 1

Size of Sticker : 90mm x 90mm
Colour: White
No background just vinyl cutted sticker, Easy to fit: Comes with pre fitted application tape

The decals are designed to fit all car models and types and all flat surfaces. 

Application & Usage: Internal Window, to Face Outwards

They can be removed, but are not reusable.
BUY 2 GET 1 FREE!

Huge range of products available that you can mix and match with this special offer - see all our eligible item!

    - please be aware that if you only purchase 2 items you WILL NOT QUALIFY and cannot redeem your free item
    - You MUST place any 3 items from our eligible 'Buy 2 get 1 free' range into your basket and PAY for all items AT THE SAME TIME and eBay will automatically deduct the cost of the cheapest product
    - eBay automatically processes the buy 2 get 1 free offers. Please do not purchase 2 and then ask us to send your free item out, as this is not how the offer works. (Again - you MUST purchase at least 3 to qualify)
How to apply.
  • 1. Clean your destination surface. The cleaner the better.
  • 2. With your decal as-is (still taped up), lay your decal (backing-side down, transfer-tape-side up) and align as you like it.    It should be adhesive side down, looking like it will look after applied. Once you get it lined up how you like it...
  • 3. Using a sharp angle, start in a corner and peel away the decals backing (away from the transfer tape that is holding the vinyl image)    Careful not to scratch your surface or cut your vinyl image. Do not try and tear the paper, this will create fuzz and dust that may create bumps under the decal.
  • 4. Using any squeegee like item (a credit card works well), begin to lay your graphic down onto your prepared surface
  • 5. Squeegee the entire image a few times, from the center outward, each time with greater pressure, making sure that all of it is good and pressed onto the surface.   making care to no allow air bubbles to form between the vinyl and the surface.
  • 6. Once you feel it is pressed on as good as can be, begin peeling the transfer tape off using a sharp angle against itself. If the image comes off the surface (sticking to the transfer tape),    simply lay back down, and squeegee as before, then try again  - remember,   a sharp angle works best when separating vinyl from either the backing or the tape. If the decal does not stick, the surface was not fully cleaned, and may have oils or dust.