Turnbuckle Tensioner Toggle Set with Lag Screw for 1/8” Cable Railing - T316 SS
We
are excited to show you a new product that we’ve developed, that is
extremely easy to work with and it’s easy to install. It works for
straight runs or on stairs. The cable is easily removed, trimmed and
reinserted if you cut your cables too long. Lets go over the features
really quick. We’ve designed this turnbuckle tensioner toggle set
seamlessly. You don’t have any visible pins or anything. There’s no
markings of how the pieces attach together. We’ve had it made extremely
robust so that you can actually install these fittings by simply
drilling a 3/16″ inch pilot hole and you insert the cable and wind it in
by hand. It couldn’t be easier, very easy to work with.
Say
you’re working with each of your lines and you run out of tensioning.
We’ve only had this designed with a 2 inch barrel, and we did that on
purpose because we wanted this to be able to be very slim, have a
minimal footprint on your rail. That’s what most of our customers were
asking for. Something very sleek and minimalist. And so we had this
design but the problem with using a shorter barrel like this is you
could potentially run out of tensioning. So with that we’ve had this
designed so its very easy. If you run out of tensioning, you simply
loosen the three hex screws, which are a number 3 alan key. You simply
loosen those, pull the cable out, make your adjustment, you open the
barrel again and trim off the excess – insert the cable and you’re able
to tighten it back up.
It also makes it really easy to make
adjustments to the turnbuckles as well. You’ll notice with some rail
systems its challenging to make sure that all of the turn buckles are
lined up and that they’re extended the same amount, to give you that
really uniform look. They’re so close together its really easy to notice
when one of them is longer or shorter than others. So this hex lock
system makes it so you can loosen these screws, remove the cable and
make those slight adjustments. You find the turn buckles that are
shorter, the ones that aren’t extended as much. You can trim off that
amount of cable so that when you reinstall it they’ll all be lined up
and uniform.
Offers 2″ of tensioning.
Sold as a set with Terminal and Turnbuckle Tensioner Toggles together.
Tensioning Turnbuckle Dimensions & Weight
– Total Length Open: 8.5″
– Total Length Closed: 7″
– Head Where Cable Is Inserted: 1.769″ x 0.464″
– Body: 1.964″ x 0.464″
– Lag Screw Threads: 1.574″ x 0.247″
– Turnbuckle Weight: 0.15 lb
Toggle Dimensions & Weight
– Total Length: 4.629″
– Toggle Body: 1.714″ x 0.464″
– Wood Lag Screw Threads: 1.574″ x 0.247″
– Total Length Closed: 6.5″
– Toggle Weight: 0.15 lb
Those who have purchased this turnbuckle tensioner toggle set also purchased the following from us
– 1/8″ Stainless Steel Cable > 100ft, 500ft, 1000ft
– A Cable Cutting Tool > 24″ Cutting & Cable Swaging Tool, Cable Cutter Tool
– Stainless Steel Spray Cleaner & Protectant > CitriSurf 77 Plus
Please feel free to contact us should you have any questions or just for a few tips & tricks!