Gas supply | Liquid Propane |
Ignition | 2D Batteries Powered (Package not included) |
Batteries Voltage | 3V DC |
Battery run time | About 6 Months |
Product weight | 18 Pounds |
Product Dimension | 13 × 7.1 × 21.7 inches (W×D×H) |
Water Flow Range | 1.2-2.64 GPM |
Temp. Rise Range | 50~122 °F |
Water Pressure Range | 3.6-110.0 PSI |
Maximum power output | 68,000 BTU/hour |
Gas Fitting | 3/8" Male Flare |
Water Fittings | 1/2" G Thread Size |
Q: Can it be used in high elevations?
A: Yes, but for areas above 2,000 feet, suggest checking if there is sufficient water supply
PS: For every 1,000 feet in elevation, the efficiency of the water heater will decrease by 10%
Q: Why is the shower leaking on first use?
A: Check the gasket connection with the shower head before use
Q: Why is the outgoing water so hot or not hot?
A: Water temperature varies from water inlet temperature and gas flow. This may cause a slight delay in temperature change. Please adjust in patience
Q: Why does the gas fitting break when installing the product?
A: The gas connector (can not be removed) and gas regulator are pre-installed on the product and each removal will damage the valve body, therefore, it is not recommended to disassemble the gas regulator after each use
Q: What is included and what is required?
A: Package includes: 2.64 GPM tankless propane water heater, 5 ft pre-installed gas regulator, 5 ft ON/OFF shower kit, hardware packs, user manual
You need a water inlet hose, and a 20 lb gas cylinder; if using a water tank, you also need a water pump