Audiophile grade aluminum metalized polypropylene film capacitor. Made in France
● GENERAL INFORMATION
Type: Metallized Film Capacitor.
Dielectric: Polypropylene Film.
Electrodes: Aluminum Metallized, Vacuum Deposited.
Construction: Round Tubular "Square Aspect Ratio" Type, Axial Leads.
Winding: Bifilar Extended Metallized Film.
Contact: Non-Inductive, Zinc Thermally Sprayed Extended Film.
Coating: Black Plastic Tape Wrapped, Grey Epoxy Resin Sealed.
Leads: Tinned Plated Oxygen Free Pure Copper.
● TECHNICAL DATA
Capacitance Range/Tolerance : 0.1 ... 330 µF, E 24 series, ±5 %, ±2 %. (see specifications for details)
Dielectric Constant : 2.1 εr, non-polar dielectric. Dielectric Absorption Factor : ≤ .05 % @ 20 °C.
Equivalent Series Resistance : Extremely low. (see specifications for details)
Self Inductance: ≤ 12 nH with 6 mm leads.
Dissipation Factor: Extremely low. (see specifications for details)
Insulation Resistance: ≥ 100,000 MΩ @ 20 °C.
Temperature Coefficient: -200 × 10-6 / °C.
Temperature Range : -55 °C to +85 °C.
Test Voltage : 1.5 × Vr for 5 sec.
Rated Voltage : PA = 250Vdc/150Vac, PB = 400Vdc/250Vac, PPE = 630Vdc/330Vac
Dielectric Thickness: PA = 4 µm, PB = 5 µm, PPE = 6 µm
Metal Layers Thickness: PA = .03 µm, PB = 0.04 µm, PPE = 0.02 µm
Metal Layers Conductivity: PA = 1.5 - 3 Ω / cm2, PB = 1 - 2 Ω / cm2, PPE = 2 - 4 Ω / cm2
Leads Diameter: 0.8, 1.0 , 1.2 , 1.5 mm Ø. (see specifications for details)
● FEATURE
Special Tubular "Square Aspect Ratio" Type Construction.
High Conductivity Metallization.
Soldered Lead Termination. High Current Capacity.
High Frequency and Temperature Stability.
Excellent Long Term Electrical and Mechanical Reliability.
No Short Term and / or Long Term Signal Aberration.
Unrivaled Handling of Fast High Current Pulse.
● ELECTRICAL PERFORMANCE
Very Low Dielectric Absorption Factor.
Very Low Equivalent Series Resistance.
Very Low Inductance.
Very High Resonant Frequency.
Ultra Linear Impedance Characteristics.
Very Low Dissipation Factor.
Very High Insulation Resistance.
*All our capacitors are checked for capacitance values and impedance before shipping out to the customer. If you need matched pairs let me know and I will send you a list of measured tolerances per cap and hand pick the closest ones.
Feel Free to ask any questions
Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage.
Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging
Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.