Adhesive Backed 15 mil Velvet Polycarbonate (Lexan) Laminate
PG-LAMPC15 is a clear textured matte polycarbonate laminating film. This polycarbonate laminate has a clear permanent acrylic adhesive on a 1.5 mil polyester film liner. PG-LAMPC15 offers protection from abrasion and moisture in interior applications. PG-LAMPC15 is best applied by using a cold laminating process (heat is not recommended). PG-LAMPC15 laminate is designed to protect digital image prints and screen-printed images for exhibit and display graphics. PG-LAMPC15 can be used in most instances where a laminate with non-glare properties is required.
Comparable to these other Brands:
- Lexjet PreLume(r) Technology Elite (5 Mil) SKU: LMP15PL5115 UPC: 848412005240
- General Formulations
- Kapco KJ5VPC
- Fellers Lamex 15 Mil
- R&J Supply
- Media One Digital Imaging Solutions
- MyBinding
- Aarongraphics
- Ritrama
- Amcad & Graphics LP
- BCI Imaging Supplies UPC:PS1538150 UPC:PS1551150
- Graphic Marking Systems LEXLAM
- Tekra
- Mactac PermaFlex
• Non-glare, very high clarity film
• High UV/Fade resistance
• High scuff and abrasion resistance, Medium-Gauge Rugged Tough
• Velvet surface hides scratches and fingerprints
• Outstanding laminate for displays and point of purchase graphics
Construction:
Product Number: PG-LAMPC15
Adhesive: Clear Permanent Acrylic
Film: 15 mil Polycarbonate
Liner: 1.5 mil Polyester
Gloss Level: 15 (avg.) @ 60°
Durability: Outdoor - up to 2 years
Minimum Application Temperature: +50° F (Minimum for Substrate)
Service Temperature Range: -40° F to 176° F
Chemical Resistance: Resistant to ammonium hydroxide - 10%, detergent, distilled water, gasoline and hydrochloric acid - 10%.
Typical Adhesion Values: 180° Peel Test
Substrate 24 hrs.
Stainless Steel 4.0 lb/in
Shelf Life: 1 year from ship date when stored in proper conditions 70° F and 50% relative humidity.
Typical Performance Values:
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should
independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
Film Type Clear Polycarbonate
Film Thickness/Gauges: 15.0mil (.015")
Tensile Strength (psi) MD > 7000 / CD > 7000
Elongation (%) MD > 150 / CD > 150
Dimensional Stability (FTM 14) MD ≤ 0.20 mm / CD ≤ 0.10 mm
Adhesive Type Solvent Acrylic
Adhesive Thickness (mils/μm) 1.4-1.6 / 36-41
Peel Strength on Stainless Steel (lbs/in) / (N/25mm) 15 min 3.5 / 15
Peel Strength on Stainless Steel (lbs/in) / (N/25mm) 24 hrs 6.0 / 26
Liner Type Clear Polyester
Liner Thickness (mils/μm) 1.5 / 38
Release Force @ 300” / min (g/2”) 15-35
Application Temperature > +40 °F
Service Temperature -40 °F to 200 °F
Storage Temp / Rel. Humidity 70 °F / 50%
Outdoor Durability Indoor only