Specification:

The brand new original high-power high-speed motor has a diameter of 60mm, similar to the 9 series motor.
The appearance of the motor is well crafted and the material is thick. The front and rear double ball bearings are equipped with built-in cooling blades, a 12 pole motor rotor, and a power exceeding 885/887 motor.
The carbon brush is a high current and copper compensation type.
The motor was originally used on high-power electric tools, and compared to similar motors, the maximum power of the power type high-power motor is generally around 800W, with a peak power exceeding 1000W.

If the nominal voltage of the motor is estimated to be 18V, the actual test of the motor can work at 12-24V.
The voltage is low, the speed is low, the voltage is high, the speed is high, and the power is high.
The specific use depends on your own actual test.
The instantaneous current of the high-power motor is large, and the instantaneous current of tens of amperes is normal.
18V no-load requires more than 80 watts, so it needs a large current power supply or a dynamic large current battery to drive,
or it needs to cooperate with the DC motor PWM governor to Pre-charge,
This can reduce the instantaneous high current impact on the power supply when the motor starts.
The motor is tested at voltages of 12V, 18V, and 24V speeds as follows:
12V voltage, no-load current 4A, no-load speed 9200 rpm.
18V voltage, no load current 4.5A, no load speed 14000 rpm.
24V voltage, no-load current 5.3A, no-load speed 19000 rpm.
The motor weighs 760 grams.

Package Include:

Motor x 1pcs