BMW X1/3/4/5 1/2/3/4/5/6/7series z4 i3 i8 DUMMY FAKE OBD | OBD2 PORT

THE LEAD IS MODIFIED TO APPEAR TO BE A LIVE OBD Port

When thief tries to connect OBD tool it seems to be live but doesn't transfer any information therefore thief loses ability to start the car via OBD port

Simple Plug and Play. Takes Minutes To Fit. 

_Will fit without modification to:

BMW 
X1 F48 E84
X3 F25 E83
X4 F26
X5 E70
1 series E81 E82 E87 E88 F20 F21
2 series F22
3 series E90 E91 E92 E93 F30 F31 F34
4 series F32 F33 F36
5 series E60 E61 F10 F11 F07 G30 G31 G38
6 series E63 E64 G32
7 series E65 E66 E67 E68 F01 F02 F03 F04 G11 G12
i3 REx
i8
z4 E85 E86

1. These leads are made using new genuine BMW OBD ports. These ports are not normally available unless you purchase an entire wiring loom.

2. Wires wrapped in the same canvas tape BMW uses on their wiring looms and use Bi-colored wires so it will look identical the original when fitted.

3. To fit simply remove pull off the dash lower panel which is held by clips then unclip your original port and clip the dummy in its place. Then plug the black male connector on the dummy into your genuine port. Now relocate the original to a place of your choosing out of sight to a thief. Finally using the cable ties supplied strap the dummy lead to your cars wiring loom to make it look like the original port.

4. Most of these devices are pre-programmed so that when they plug into a vehicle, the alarm is turned off during the ‘hacking’ process. Once ‘hacked’ these devices usually then program a new key or trick the vehicle into thinking the key is already present. In many instances, this process can take less than 30 seconds before the thief can drive the vehicle away. Another major issue facing the automotive industry as vehicles become more connected and integrated into owners lives is the threat that sensitive personal information stored in the vehicle may also be hacked and stolen using the same process and access through the OBD port.

Protector has been fully independently tested to ensure when fitted, it does not have any negative effect on a vehicle.

Installation takes approximately 15 minutes if your comfortable removing a few trim panels you will be able to install the Dummy OBD Port.

We have dummy OBD for all cars if you are not sure about products compatibility always feel free to contact us!!

Items are located in Lithuania. Shipping takes around 4-10 working days in Europe and UK. 


www.dummyobd.com