Stage 1 Turbo Kit with 3-36 psi adjustable pressure-switch for gasoline and diesel cars.
The operation: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again.
Water/ Methanol Injection pump has no pressure cut-off switch for eliminating any oscillation/pulsation. Internally bypasses for a smooth constant even flow at the nozzle. Our standard water-methanol pump is suitable for up to 1000hp. If you need more than 1260 ml/min or 20 GPH. Please choose the bigger pump and controller.
All metal equipment has the durability to corrosion of methanol and water, which constitute corrosion impact-resistant nickel-plated brass, brass, and EPDM grade plastic material.
All of our products are guaranteed for 2 years against the fabricated problem from the date of receipt by you.
Nozzles have a flow rating of your choice:
95cc / 125cc / 157cc / 189cc / 220cc / 252cc / 283cc / 315cc / 378cc / 378cc / 440cc / 504cc / 567cc / 630cc / 755cc / 880cc / 1000cc / 1130cc / 1260cc / 1575cc / 1890cc / 2200cc
1.5 GPH | 2 GPH | 2.5 GPH | 3 GPH | 3.5 GPH | 4 GPH | 4.5 GPH | 5 GPH | 6 GPH | 7 GPH | 8 GPH | 9 GPH | 10 GPH | 12 GPH | 14 GPH | 16 GPH | 18 GPH | 20 GPH | 25 GPH | 30 GPH | 35 GPH
100% Water: 10-15% Water/ Fuel ratio or 0.5-1cc per HP
%50-50 Water-Methanol: 15-20% W-M/ Fuel ratio or 1-1.5cc per HP
100% Methanol: 20-25% Methanol/ Fuel ratio or 1.5-2cc per HP
Please indicate which nozzle size and color of hose you prefer before the order item. If you don't specify the size, we will send you a 252 ml/min (4 GPH) nozzle and Red Hose.
Included: We do not send spring fittings, in-tank filter and black hose, fuse and holder any more the picture is old. We put the fuse inside of the controller, compression type boost switch fitting to push-in and change elbow to straight pump fitting. The correct part list below.
1. High-Pressure Diaphragm pump
2. 2 x 3/8th NPT to ¼" compression type fitting
3. Nozzle
4. Nozzle mounting bung
5. 40-micron stainless steel filter
6. Filter nut
7. Check valve
8. 2 x 1/8” NPT to ¼" compression type fitting
9. Boost switch
10. 1/8” NPT to ¼" female fitting
11. Controller with wiring loom
12. 0.8 Gallon/ 3.17 Quart/ 3 Liter Plastic tank
13. Plastic tank cap
14. Tee Fitting
15. 20 FT/ 6 meters ¼” OD. injection hose
16. 2*Fully insulated female cable connector
17. 2*Fully insulated butt cable connector
18. Fully insulated Ground cable connector
19. LED holder
20. 5*zip tie
21. 2*screw and 2*washer for tank
22. 4*screw and 4*washer for pump
23. 3d sticker
24. Stickers
25. Installation manual
PAYMENT POLICY
SHIPPING POLICY
RETURNS POLICY