MITSUBISHI L200 96-07 TOP BALL JOINT SPACER KIT UPPER BALL JOINT SPACER KIT

THIS KIT IS A UPGRADE OVER THE STANDARD M8 BOLTS MUCH STRONGER FOR YOUR DEMANDING NEEDS!  FOR MORE INFO WATCH THE VIDEOS ON MY NEW YPOU TUBE CHANNEL 

M10 BOLTS SUPPLIED WITH THIS KIT.  THIS REQUIRES YOUR UPPER BALL JOINTS AND UPPER CONTROL ARM TO BE DRILLED OUT FROM 8MM TO 10MM.  I CAN ALSO SUPPLY 555 BRAND UPPER BALL JOINTS BORED OUT TO M10 IF REQUIRED. MESSAGE FOR DETAILS

This kit is used to raise the height on the front of the vehicle without maxing out the Torsion bars and creating a harsh ride on the bump stops.
They also allow for greater articulation on the front end.
Doing an upper balljoint flip and fitting spacers gives you more clearance between the upper control arm and the bump stops, which will allow you to turn the torsion bar up more which will give you more lift

The kit comprises of the following
2 x 10mm ball joint spacers

6x HT bolts
6 nyloc nuts
12 washers
4x2mm camber correction shims
4x5mm camber correction shims
4x longer Top wishbone bolts with washers and nyloc nuts
These are a new desing of camber shims harder to fit but will never fall out. 

Watch the fitting videos on my UTube channel

https://www.youtube.com/channel/UCzSw_Qu4ggFhZtn5m-BHDew?disable_polymer=true

fitting video made by a customer and forum member

https://youtu.be/BRmmGuO945Y
https://youtu.be/d3a1u7Iks2Y