Dimensions:

Installation:

No need to change existing wiring.

Related installation manual and wiring map is included in each pack. In general installation ports are:

L: Live (usually brown cable)

L1, L2, L3: Light/set of lights (usually blue cable)

B: Common/two way communication (usually grey cable)

A: Live connection between master unit and slave unit (required if there is no common cable for 2+ ways system)

Please note that for WIFI Integrated types neutral wiring is required. 

N: Neutral (only for WIFI Integrated type)

On/Off Models:

Touch the circle once to turn on (backlight is red), touch the circle again to turn off (backlight is green).

You will hear a soft beep sound at each touch to indicate operation.

Dimmer Models:

Touch the circle once to turn on and off.

Touch and hold the circle to dim up gradually and repeat the same for dim down gradually.

With intelligent memory function, the next touch will remember the brightness of the last lamp closure

You will hear a soft beep sound at each touch to indicate operation. Backlight will be red when loads on.

Please note that only 1 Gang WIFI Integrated Dimmer model comes with 3 circles to control the same light.

1st Circle: Dim Up , 2nd Circle : on/off and 3rd Circle: Dim Down

Pairing remote controller (remote models only):

1) Press and hold the oval/circle gang on the switch for 5 seconds, you will then hear a beep.

Once you've heard this beep take your finger of the gang.

2) Press either A, B or C on remote controller depending on the button you want to work with that gang. Once you've pair the gang(s) that button ( A,B or C) on the remote will only work with that gang.

(To switch all gangs off press the button D on the remote)

1gang dimmer is controlled with one remote controller.

Button A: Switch On&Off

Button B: Dim Up

Button C: Dim Down

Button D: Switch Off.

2gang dimmer is controlled with one remote controller.

Button A: Switch On&Off First Gang

Button B: Switch On&Off Second Gang

Button C: Dim Up

Button D: Dim Down

In order to control first gang, Press A and then button C and button D to control dim.

In order to control second gang, Press B and then button C and button D to control dim.

3gang dimmer is controlled with two remote controllers.

First Remote Controller operates first gang:

Button A: Switch On&Off

Button B: Dim Up

Button C: Dim Down

Button D: Switch Off

Second Remote Controller operates second and third gangs.

Button A: Switch On&Off Second Gang

Button B: Switch On&Off Third Gang

Button C: Dim Up

Button D: Dim Down

In order to control second gang, Press A and then button C and button D to control dim.

In order to control third gang, Press B and then button C and button D to control dim.

Pairing 2 way and intermediate models:

1) With the lights off press and hold the light switch on the master button for 5 seconds until you hear a beep.

2) Within 10 seconds press the corresponding gang on the slave switch you want to pair with the master switch,

The switch will flash or beep to confirm pairing is successful.

3) Repeat the process for all gangs you want pair.

Please follow the Wiring diagram correctly when connecting 2 Way switches. 

It is important that you ensure A to A and B to B is wired correctly as they carry the Live.

It is possible to place a load on each switch. 

You only need to ensure that if a Load is connected to any one of the terminals on 1 switch the corresponding load 

on the second switch is kept empty unless both Gangs intend to be used as 1 Way instead of 2 Way.

PLEASE NOTE WE WOULD RECOMMEND ALL OUR PRODUCTS TO BE INSTALLED BY CERTIFIED ELECTRICIAN.