50 Watt and 12 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.50 Watt 12 Ohm Aluminum Case Resistor with 5% TolerancePower: 50WResistance: 12 ohmTolerance: 5%Connection Type: RodsBoard Length: 49.8mmMounting Hole Diameter: 3.5mmDistance Between Mounting Hole: 41mmMaterials: Nickel Alloys Wire Wound Resistor with Aluminum CaseColor: GoldPackage Content: 1 pcs 50W 12 ohm Aluminum ResistorSuggestion:a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a
normal physical phenomenon.
b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc. c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.
If you choose a 30% increase in rated power, you must add a heat sink device.If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.
d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.
50W 12 Ohm Aluminium Chassis Mount Wirewound Power Resistor Glod 1pcs
50 Watt and 12 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
50 Watt 12 Ohm Aluminum Case Resistor with 5% Tolerance
Power: 50W
Resistance: 12 ohm
Tolerance: 5%
Connection Type: Rods
Board Length: 49.8mm
Mounting Hole Diameter: 3.5mm
Distance Between Mounting Hole: 41mm
Materials: Nickel Alloys Wire Wound Resistor with Aluminum Case
a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a
normal physical phenomenon.
b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.
c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.
If you choose a 30% increase in rated power, you must add a heat sink device.
If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.
d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
50W 12 Ohm Aluminium Chassis Mount Wirewound Power Resistor Glod 1pcs
50 Watt and 12 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
50 Watt 12 Ohm Aluminum Case Resistor with 5% Tolerance
Power: 50W
Resistance: 12 ohm
Tolerance: 5%
Connection Type: Rods
Board Length: 49.8mm
Mounting Hole Diameter: 3.5mm
Distance Between Mounting Hole: 41mm
Materials: Nickel Alloys Wire Wound Resistor with Aluminum Case
a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a
normal physical phenomenon.
b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.
c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.
If you choose a 30% increase in rated power, you must add a heat sink device.
If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.
d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.