DSLRKIT Dual voltage output PoE HAT for Raspberry Pi 4B 3B+(3B Plus)
Maximum. 26Watt DC12V(0-2.2A)+DC5V(0-3A)
With 1.5KV isolation
Compatible unsolicited Passive PoE Switch
Additional 5.5x2.1 DC port output DC12V
Note:
The product must be used in conjunction with a Raspberry Pi 4B 3B+ and a PoE switch (or PoE injector)
Output power Max.14Watt (DC5V+DC12V) when used with the IEEE802.3af standard PoE switch(or 802.3af PoE injector)
Output power Max.26Watt (DC5V+DC12V) when used with the IEEE802.3at standard PoE switch (or 802.3at PoE injector)
Output power Max.26Watt (DC5V+DC12V) when used with the DSLRKIT Non-standard 48V~52V Passive PoE switches (or 48V~52V Passive PoE injector)
This is a 5V+12V dual output PoE HAT for Raspberry Pi 4B and 3B+, with a maximum output power of 26Watt when combined with 802.3at standard PoE switch (or 48V~57V Passive PoE switch/injector). According to the adaptive current output of devices requirements,it can be :(Typical:12V 0.9A+DC5V 3A), (12V1.1A 5V2.5A), (12v1.3a 5V2A) or (12V2.2A 5V0A)... Depends on your devices requirement.
This POE HAT can power Raspberry Pi 3B+ as well as another 12V device, such as a 12V LCD screen or a 3.5in USB hard drive, as long as the power of this 12V device is not high enough to affect Raspberry Pi. But the premise is that you need to use a POE switch that supports IEEE802.3AT.
When using the 802.3af standard POE switch,the maximum output power is about 14Watt, such as:(5V2.5A+12V0A),(5V2A+12V0.3A),(5V1.5A+12V0.5A) or (5V1A+12V0.75A). the maximum output power is only 12.5Watt If only output 5V. After testing,it can not be connected to the 3.5in USB hard drive when working with 802.3af standard POE switch,It will cause the POE switch to cut off the power output due to overload. However, the external 12V LCD screen seems to work normally. For example, the 13in LCD screen on the item picture, the power requirement on this LCD screen manual is 12V1A (for reference only, some LCD screens may consume more power).
In addition, the official website FAQs mentions that the Typical bare-board active current consumption of Raspberry Pi 3 Model B+ is 0.5a (2.5watt). However, it is recommended to reserve at least 1A(5watt) for Raspberry Pi when there is no external devices (usb,camera,spi, etc.). Since the system consumes a lot of power when booting, Max. 0.75A(3.75watt) when referring to boot in FAQs.
Compatible with IEEE 802.3af / 802.3at standard POE switches (secure power supply):
8 Ports Ethernet Gigabit 8 PoE Switch 120W 802.3af http://www.ebay.com/itm/201396693014
5 Ports Ethernet Gigabit PoE Switch 4 PoE IEEE802.3af http://www.ebay.com/itm/191632746362
5 Ports Ethernet 10/100mbps PoE Switch 802.3at https://www.ebay.com/itm/191902466234
5 Ports Ethernet 10/100mbps PoE Switch 802.3at https://www.ebay.com/itm/201994186442
9 Ports Ethernet 10/100mbps PoE Switch 802.3at https://www.ebay.com/itm/201994199893
Compatible with Non-standard 48V~52V Passive PoE switches and PoE injector:
Gigabit 48V 120W 8 Ports 7 PoE Injector PoE Switch: http://www.ebay.com/itm/191784190108
10/100mbps 48V 120W 9 Ports Passive PoE Switch: http://www.ebay.com/itm/201509599271
10/100mbps 48V 72W 5 Ports Passive PoE Switch: http://www.ebay.com/itm/191917492518
250meter 10/100mbps 52V 120W 10 Ports Passive PoE Switch(Gigabit UpLink): http://www.ebay.com/itm/202326943534
250meter 10/100mbps 52V 120W 10 Ports Passive PoE Switch: http://www.ebay.com/itm/201897338202
250meter 10/100mbps 52V 75W 6 Ports Passive PoE Switch: http://www.ebay.com/itm/202185617429
Cost-effective choice:
Gigabit 48V PoE Injector Adapter https://www.ebay.com/itm/202563059094
48V 0.5A Passive PoE injector(10/100Mbps): http://www.ebay.com/itm/191011392732
Specification:
Compliant IEEE802.3at Type 2 "PoE+" standard
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE injector
Support Power sourcing equipment (PSE) Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Isolation: 1.5kV
Power Input: DC38~57V
Power Output: Max.26Watt(DC5V+DC12V)
Operation Temperatue:-10℃ ~ 75℃
Storage Temperature:-30℃ ~ 80℃
Item Included:
RPi-AT-PoE12V5V PoE HAT x1
5.5mm*2.1mm male to male DC Power Cable x1
DC 5.5*2.1mm Female to 3.5*1.35mm Male Plug Adapter x1
Plastic fixed column x4