Millers CFS Fully Synthetic 10W60 Nanodrive 5 Litres + Free Screenwash Tablet Sufficient for 5 Litres of Washing Water (Simply Insert the Tab and Add Water)

Description

Competition fully synthetic petrol/diesel engine oil. Formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with latest additive technology for maximum performance, CFS 10w60 is recommended for fast road and racing use. This grade is suited to larger race and rally engines, with or without turbochargers, especially when subject to severe and high-stress conditions. The ultra-low friction, nanotechnology additives successfully proven in motorcycles with wet clutches     

Application

Use as received for competition or modified engines

Suitable for all normally aspirated and turbo-charged engines from 2 litres upwards  

User Benefits

• Provides up to a 26% reduction in friction plus a reduction in wear compared to a standard engine oil
• Fully synthetic oils provide many outstanding performance benefits over conventional mineral oils
• By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to 'shear' and viscosity loss in highly stressed areas

• Load carrying capacity many times that of mineral oil
• High film strength for ultimate protection
• Outstanding cold-flow properties for reduced wear at startup
• Excellent thermal stability and oxidation resistance
• The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the performance of the oil
• CFS 10W60 is formulated to protect both petrol and diesel competition engines operating under extreme conditions e.g. long-distance racing, rallying in both normally aspirated and turbocharged engines

• Suitable for 5 hours testbed running or 500 mls / 800 km on the road
• Optimum oil temperature 85 - 115C
• Very low leak down [4%] after controlled testbed running 

Typical Characteristics

SAE Grade                                              SAE 10w40

Specific Gravity @ 15ºC                          0.868

Kinematic Viscosity @ 100ºC                  23.0 cSt

Kinematic Viscosity @ 40ºC                    162 cSt

Viscosity Index                                         171

Pour Point ºC                                            -42

Flash Point ºC                                          240

Cold Crank Viscosity @ - 30ºC                7,000Cp maximum

TBN mg KOH / gm                                   10.0

We are dedicated to ensuring the highest possible quality service to our customers.

Click to expand the tabs below to read more about our policies.