7S 25.9V 30A lithium polymer battery BMS, 30A continuous 100A peak current, 500-800W 24V 30A li-ion battery BMS, balance function.
Features
1. It is suitable for 3.7V cell 7S 24V 10Ah, 20Ah, 30Ah, 40Ah and 50Ah lithium ion batteries pack.
2. With functions of protection from voltage, current detection, including over-current, overvoltage, under-voltage and short circuit protection, voltage balance function.
3. This BMS was build with high end electronic components (High End Integrated IC chip and MOSFET ) ,It has highly precision on detection on voltage and current .stable working performance in extremely condition.
Electrical Characteristic (Ta=25 ºC)
No. | Test Item | Min. | Typ. | Max | Unit |
1 | Input Charging Voltage |
| 29.4 |
| V |
2 | Input Charging Current |
| 10 | 15 | A |
3 | Output Discharging Current |
| 30 |
| A |
4 | Over-Current Discharging Protection | 85 | 100 | 115 | A |
5 | Current Consumption | 10 | 15 | 25 | uA |
6 | Balance Current | 45 | 50 | 55 | mA |
7 | Balance Voltage | 4.16 | 4.18 | 4.20 | V |
8 | Over-Charge Protection Voltage | 4.21 | 4.25 | 4.3 | V |
9 | Over-Charge Protection Voltage Release | 4.0 | 4.15 | 4.2 | V |
10 | Over-Charge Protection Voltage Delay Time | 1.0 | 1.5 | 2.0 | S |
11 | Over-Discharge Protection Voltage | 2.42 | 2.5 | 2.58 | V |
12 | Over-Discharge Protection Voltage Release | 2.9 | 3.0 | 3.1 | V |
13 | Over-Discharge Protection Voltage Delay Time | 1.0 | 1.5 | 2.0 | S |
14 | Short Circuit Protection Release | Remove the load | |||
15 | Impedance |
| 8 | 15 | mΩ |
16 | Operating Temperature | -15 | +25 | +45 | ºC |
17 | Storage Temperature | -20 | +25 | +30 | ºC |
Wiring instructions:
power cable
B-:Connect to battery negative (Black cable 12AWG L=150±5mm)
P-:Connect to negative of discharge port (Blue cable 12AWG L=150±5mm)
C-:Connect to negative of charge port (Black or Yellow cable 14AWG L=150±5mm)
Voltage monitoring cable
cable type:UL1007 22AWG L=300±5mm
B-(Black),B7+(Red)
B-(GND)/B1/B2/B3/B4/B5/B6/B7 (B+)
Remarks:
Please connect B- line firstly, and then connect voltage monitoring wiring harness. The last step is to connect charge and discharge lines. If you want to remove them, the order should be reversed. Please pay attention to the connection order, or it will damage the component.
Despatch in less than 24 hours
Direct from the manufacturer
We never close
We Allow Payment Through Paypal With No Additional Charge.
Rapid Shipping On All Orders*
The customer has the right to return any product within 30 days of its purchase, provided that it’s either unopened, or opened but in new condition, boxed and with all original accessories.
The customer will bear the shipping cost of returning the product to us.
Full refund or a replacement will be issued once we’ve received and checked the product.
Please Don't Hesitate To Contact Us.
Message Us Via eBay Messaging Service
We Are Happy To Assist You! Please Message Us For Further Assistance.
*unless we are away, and set dispatch time to longer