100% OEM original look. Made with colored wires and genuine Ford ports.
THE LEAD IS MODIFIED TO APPEAR TO BE A LIVE OBD Port.
When thief tries to connect OBD tool it seems to be live but doesn't transfer any information therefore thief loses ability to start the car via OBD port. You can do diagnostic and all services using relocated port.
Simple Plug and Play. Takes Minutes To Fit.
Fitment:
- Will fit without modification to all Ford with white diagnostic port:
- All Ford Focus MK3s including ST & RS 2011-2018
- All Ford Fiesta MK7.5s including ST 2008-2017
- All Ford Transit custom EU5 EURO 5
- And others..
This OBD plug will fit all MK3 Ford Focus models and all Ford Fiesta MK7 & 7.5 models including the ST 180, ST 200, Focus RS and Focus ST 250 pre and post facelift.But Please note this lead will fit the Transit Custom upto 2016 EU5 with the white OBD port but will not fit the 2017 EU6 as the OBD port is not removable.
1. These leads are made using new genuine Ford group OBD ports. These ports are not normally available unless you purchase an entire wiring loom.
2. Wires wrapped in the same canvas tape as Ford uses on their wiring looms and use Bi-colored wires so it will look identical the original when fitted.
3. To fit simply remove pull off the dash lower panel which is held by clips then unclip your original port and clip the dummy in its place. Then plug the black male connector on the dummy into your genuine port. Now relocate the original (live data port) to a place of your choosing out of sight to a thief. Finally using the cable ties supplied strap the dummy lead to your cars wiring loom to make it look like the original port.
4. Most of these devices are pre-programmed so that when they plug into a vehicle, the alarm is turned off during the ‘hacking’ process. Once ‘hacked’ these devices usually then program a new key or trick the vehicle into thinking the key is already present. In many instances, this process can take less than 30 seconds before the thief can drive the vehicle away. Another major issue facing the automotive industry as vehicles become more connected and integrated into owners lives is the threat that sensitive personal information stored in the vehicle may also be hacked and stolen using the same process and access through the OBD port.
Protector has been fully independently tested to ensure when fitted, it does not have any negative effect on a vehicle.
Installation takes approximately 15 minutes if your comfortable removing a few trim panels you will be able to install the Dummy OBD Port.
We have dummy OBD for all cars if you are not sure about products compatibility always feel free to contact us!!
Items are located in Lithuania. Shipping takes around 4-10 working days to Europe and United Kingdom.
www.dummyobd.com
Will fit without modification to most Ford models. We always recommend to check your cars OBD port look or message us before buying.