1. Prepare surface correctly. Use water to clean, then dry. (Don’t use cleaning liquids, sprays or soaps)

2. Squeegee over sticker, to ensure the clear application tape has a good bond of the vinyl and will lift it from the backing paper.

3. Carefully remove backing paper (white/blue) , leaving the sticker on the clear application tape, if you have any issues lifting the vinyl with the clear application tape, repeat step 2 until it comes up easily.

4. Apply one edge of the sticker on to the surface, slowly lay the rest of the sticker down, using a card or similar item will help squeegee it. Ensure you have firmly squeegee’d the sticker onto the surface for best adhesion.

5. Slowly, Remove the clear application tape, leaving your new sticker applied to the surface.