Squeeg's 32 Ford 5 Window Deuce Coupe as illustrated by Jimmy
Smith. The car that started it all printed in cream and black on a white Gildan
Ultra Cotton short sleeve T-Shirt. Image is small on the left front chest and
large on the back. This design is also available in a black short sleeve shirt
or men's long sleeve black t-shirt as well as in women's shirts and tank tops
in black or white.
PRODUCT TAGS: 1932, 32, Ford, Deuce,
5-Window, Coupe, Jimmy Smith, Short Sleeve, White, T-Shirt, GIldan, Ultra-Cotton,
Men’s, Medium, Large, L, Extra Large, XL, Double Extra Large, 2XL, Triple Extra
Large, 3XL,
All of our products are
proudly 100% made in the U.S.A. Our products are original
designs meant to fill a void in the market, not just a copy of something
already being offered. We have been using these parts for years in the shop on
the cars we drive and build at Squeeg’s Kustoms. Look for our other parts
in our eBay store.
Also available from Squeeg’s Hot Rod
Aluminum Line Separators: Black
anodized aluminum line separators for Fuel Line, Oil Line, Heater Line &
A/C Line – including the new EZ-Clip A/C Line. Separators are available for two,
three or four lines in all popular configurations. An innovative design where
the lines simply clip in to make installation and future servicing a snap with
no fiddly hardware to lose. Sold individually. Matching Plug Wire Separators
also available.
NEW Nylon Line
Mounts & Separators: The same
design as our aluminum separators, but made out of durable nylon at a fraction
of the cost and also made as mounts . Available for standard A/C Line. EZ-Clip
A/C Line and Heater Line. Mounts include 8-32 hardware. Sold individually. Matching
Nylon Spark Plug Wire Mounts, Separators, and Kits available.
Aluminum Spark Plug Wire Kits, Mounts
& Separators: Black anodized
aluminum separators for plug wires. Just like our Line Separators, the wires
simply clip in to make installation and future servicing a snap with no fiddly
hardware to lose. Offered in 8mm and 8.5mm. There are 3 kits for Big
Block Chevy, Small Block Chevy, and Small Block Ford in either 8mm or 8.5mm.
Also available are the individual components so customers can build their own
kits. The wire mounts are sold two per pack and the floating separators four
per kit
NEW Nylon Spark Plug Wire Kits,
Mounts & Separators: The
same design as our original aluminum, but made out of durable nylon at a fraction of
the cost. Just like our Line Separators, the wires simply clip in to make
installation and future servicing a snap with no fiddly hardware to lose.
Offered in 7mm, 8mm or 8.5mm. There are 6 different kits for Big Block Chevy,
Small Block Chevy, Small Block Chrysler, Big Block Fords and Small Block Ford.
Also available are the individual components so customers can build their own
kits. The wire mounts are sold two per pack and the floating separators four
per pack. New shorty and 90° mounts for tight applications.
Aluminum Grommets: A unique alternative to simply using a rubber grommet
when routing lines, cables, wires, etc. through any panel. Deep enough to run
through frame rails or can be used on thin sheet metal panels. Size from ¼” to
1 ¼” available in raw aluminum and now black anodized. Sold individually.
Line Bulkheads: Aluminum bolt-on #3 AN brake line bulkhead. Perfect for
joining your hard line to a brake hose. Mounts solid to your frame for a secure
connection. Available soon for #4AN, #6AN & #8AN. Sold individually.
Epoxy
Primer Filler Kits and Epoxy Top Coat Kits: Looking
for the good stuff you used to use? Our legendary Epoxy Primer is still
available! The same stuff we’ve been using in the shop for decades is still
available. Not legal for sale or use in CA, CT, DE, IL, IN, MA, MD, ME,
NH, NJ, NY, OH, PA, RI, VA or VT. We cannot, under any circumstances, ship to
these states. Any order placed from these states will be refunded. Sold with 1
gallon of part A, 1 gallon of part B and either a quart or gallon of reducer.
Exhaust Tips: Beautiful brushed stainless steel exhaust tips flared
at the ends designed to be welded on. Available for 2”, 2-1/2” & 3”
exhaust. Sold individually.
Aluminum Hood Release Handle: Easier to use than the standard round knobs included
in most hood release kits. Machined aluminum handle fits ¼” (0.25”) shaft.
Pewter Key Chains: Based on original artwork by Jimmy Smith of cars built
by Squeeg’s Kustoms. 6 designs available; 32 Ford Coupe, 33 Ford Roadster, 34
Ford Coupe, 36 Ford Coupe, 40 Ford Coupe, and 50 Merc Custom. Sold
individually.
Steering Wheels, Adapters &
Spacer: Cast aluminum drilled I Beam
style perfect for early hot rods. Available as cast or polished, wrapped or
unwrapped. Two column adapters available: early Ford (1928-48) keyed columns
and GM splined columns as well as an Aluminum ½” spacer. Sold individually.
T-Shirts: Several styles available featuring artwork by Jimmy
Smith. Available in Black or White in Sizes from Medium through 3XL. Many
clearance shirts are available in various colors as well as Women’s shirts and
hats.
Weld in Bulkheads: Steel
weld-in frame bulkheads to run lines or wiring through your frame. Weld in
bulkheads available with a plain removable plate or with two terminals perfect
for running wiring from your battery to your starter. Squeeg’s offers
its own design of bulkhead plates for use in almost any frame. Chose from
a blank plate or with terminals. The weld-in plate consists of ¼ 1018
steel and is milled to accept a precision fitted cap. Offered in an oval or
round design, these plates will allow you to run your plumbing or electrical
through your frame rails. The electrical plate consists of two nylon insulated
terminals with brass inserts. The small terminal is tapped at 10/32 and the
large is at ¼ 20. This is ideal for running electrical to the starter. We also
offer a blank plate which can be drilled for AN bulkhead fitting for plumbing
or any other use you may need. Sold individually.
Wheels: Early Sprint Car style classic aluminum wheels.
Available in Starburst for Ford spindle mount 15” x 4.5”, Sprint in sizes
from 15” x 4.5” through 16” x 10”, and Champs in sizes from 16” x 11” through
16” x 13”. All wheels are made to order. Standard available bolt patterns 5 on
4 ½”, 5 on 4 ¾” and 5 on 5 ½”. Other bolt patterns are available, contact us
for more information.
Wheel Center Caps: Cast aluminum caps designed to match cast wheels.
Originally designed for Halibrand style American Rebel wheels, but suitable for
many other wheels. Made in flat or with a domed center. Available as cast or
polished in 5 on 4 ½”, 5 on 4 ¾” and 5 on 5 ½” bolt patterns.
PROP 65 WARNING: May contain
materials known to the state of California to cause cancer or reproductive
harm.