- Condition: 100% new
- Clock Color:White
- Light Color: Blue / Green / Red / White
- Material: Acrylic & Metal
- Size: approx. 21.5x8.8x3.8cm(8.46x3.46x1.5inch)(L x H x D)
- Cable length: approx. 122cm(48inch)
- Power Consumption: DC input 5V/500mA
- Battery Type: CR2032 button cell battery (not included)
- Suitable for: Bedroom
- Item included:
1 x LED Clock
1 x USB Cable
1 x User Manual
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
Product Dimension:
Attribute:
Feature:
1) Lightweight and concise space, easy to place anywhere in your room.
2) Night mode with automatic dimming: 3 levels of brightness(High, Medium and Low level; the default brightness is medium).
3) LED time display(the time display 0:00).
4) Total 3 functional buttons:MODE,UP,DOWN.
5) Total 4 positions time display(12/24 hour modes).
6) The alarm AL display is 6:00.
7) Alarm with snooze function.
8) Snooze function: you can take a nap for a little while. It can be freely set from 5 to 60min. (The default interval time is 5 minutes)
9) USB powered and button cell battery for back-up function.
Time Setting:
1) Under time mode, hold MODE button for 2 second will enter the time setting mode. The setting sequence: hour, minute.
2) During the setting process, the setting article will flick.
3) Press UP and DOWN buttons to set the desired hours.
4) Press Mode button once to switch to minute setting and then press UP and DOWN buttons to set the desired minutes.
Alarm Setting:
1) Press the MODE button, AL icon flicker, it enters the alarm mode. Under alarm mode, hold MODE button for 2 second will enter the time setting process. The setting sequence: hour, minute, snooze.
2) During the setting process, the setting article will flicker.
3) Press UP button once and ahead; Hold for 2 second, go ahead at an 8 step/second speed.
4) Press DOWN once and back; Hold for 2 seconds, go back at an 8 step/second speed.
5) During the setting process, the AL icon will flicker.
Snooze Setting:
1) When the clock is alarming, press MODE button will stop alarm and activate snooze function.
2) Under alarm setting mode, press MODE button three time and when the right 05 is flickering, set the snooze time between 5 and 60min. The default snooze interval time is 5 minutes.
Brightness Level Setting:
1) 3 Brightness levels: Bright, medium, dark.
2) Default brightness level is medium.
3) Press UP to switch brightness level.
