|
110V 2L Rotary
Evaporator Rotavapor Lab Equipment |
A rotary evaporator is a device
used in chemical laboratories for the efficient and gentle removal
of solvents from samples by evaporation. When referenced in the
chemistry research literature, description of the use of this
technique and equipment may include the phrase "rotary evaporator",
though use is often rather signaled by other language (e.g. "the
sample was evaporated under reduced pressure").
Rotary evaporators are also used in molecular cooking for the
preparation of distillates and extracts. |
Foam removal method:
1. Condenser bottle mouth downward to let the foam out by itself.
2. Do not shake the condenser when there is a small amount of foam
left in the condenser. Shaking is easy to damage the glass tube in
the condenser. An
acidic liquid can be poured into the condenser to dissolve the foam. |
|
|
Specification: |
Model: RE-201
1. Capacity of evaporating flask: 1L
2. Capacity of collecting flask: 1L
3. Vacuum: -0.098Mpa
4.Rotating speed: 0 - 120 R/min
5. Evaporating speed: ≥1.5L/H20
6.Temperature range:Room temperature-99℃
7. Motor power: 40W
8. Water bathing power: 1KW
9. Voltage: 110V |
Features: |
Rotator consist of a group of
reliable micro motor and integrated circuit control device. Under
the effect of the electronic speed regulation, it can be rotated
stably within the
range of 10-120rpm, reaching the international advanced
level
1. Special fluoro rubber sealing, high corrosion resistance.
2. High evaporating efficiency & high recovery.
3. Modular design, easy to connect to other appliance.
4. Easy to install and disassemble, easy to operate & maintain.
5. The main body extensively adopts stainless steel and
aluminum alloy, firm and beautiful
6. RE-201 rotary evaporator's heating bath is lifed manually,
lifting distance is 120mm
7. Two kinds of condenser structures for choosing, one
adopts double line convection principle, used for inorganic solvent
evaporation. The other is a single line container
with a interlayer cooled by water and dry ice, used or
evaporating the organic solvent.
Using vertical condenser to save space.
8. The rotating shaft using high borosilicate glass,
the joints using fluorine rubber framework oil seal to seal, high
tightness and better effect. |
|
|
Packaging: |
|
Shipping &
Handling Details |
Default Shipping Cost or Free Shipping Information:
▲Default
shipping cost or free shipping service is only for the lower 48
United States by UPS Ground or USPS. Other areas or needs other
shipping ways, please contact us.
▲Buyers
from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska,
Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL
be extra shipping costs, please contact us for more detailed
information.
▲Please
make sure your address is valid for both UPS and USPS services.
Any costs incurred because of incorrect or undeliverable address
should be undertaken by buyer.
Handling Time:
Shipping is usually made in 1-3 business days after payments
cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Sales tax / Customs duties:
Any sales taxes or Customs duties are not included. If came out,
they must be undertaken by the buyer. Sales Tax of 8% will be
applied for orders shipped within the state of California.
Damage In Shipping:
Email
or call us First! We will work with you to get the case resolved
in the fastest method. |
Return / Refund |
If you are not
100% happy with your purchase, please contact Us. Please don't
directly opened a request or case without informing us, or else,
we will do some discounts on the warranty and other
sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14
days of delivery date. Items must be in new, unused condition,
with all original materials included with the shipment. A
partial refund may be applied for opened or damaged
items, depending on the condition.
▲Items returned under the buyer’s
remorse: The return shipping fee must be covered by the buyer;
The original shipping cost will also be deducted from the
refund. 15% restocking fee of the items purchase price will
be charged.
▲Returns that are the result of our
seller's error: Buyer will receive a full refund of the item as
well as shipping charges.
▲All returns require a RA (Return
Authorization) number that will be given by our seller. Please
contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or
not as described, please send us some pictures or videos, so we
could well understand your problem, then solve them for you
ASAP. Besides, it's much helpful for us to claim with
UPS, remind our related department to pay much more attention to
packaging later on. Hope for your understanding.
▲Replacement or refund of defective
or damaged products can only be returned in exchange for the
exact same product, or else, the purchase price will be refunded
back to your original payment method.
▲If an item is received damaged,
customer service must be contacted within 7 days of receiving
your item.All returns require a RA (Return Authorization) number
as above.
|
Payment |
eCheck Issues: Payments via
eCheck do not clear immediately. Usually you will wait 5-7
days after checkout for it to clear. Then we will arrange
shipments for you.
|
Warranty & Feedback |
▲6 months' warranty for the
machines, not for the consumables. We stand behind our products
all the item, so even if your warranty period has expired, you
can still seek for service or technical support from us with low
cost.
▲Any warranty shipping cost to us
is responsible by buyer.
▲Any shipping cost to buyer is
responsible by the seller.
▲We committee to the customer
satisfaction and want to bring you the best purchase
experience. If there is any problems, please contact us ASAP. If
not, please leave us a positive feedback as it's very important
for us. Thanks very much. |
|
110V 2L Rotary Evaporator
Rotavapor Lab Equipment |
A rotary evaporator is a device used
in chemical laboratories for the efficient and gentle removal of
solvents from samples by evaporation. When referenced in the chemistry
research literature, description of the use of this technique and
equipment may include the phrase "rotary evaporator", though use is
often rather signaled by other language (e.g. "the sample was evaporated
under reduced pressure").
Rotary evaporators are also used in molecular cooking for the
preparation of distillates and extracts. |
Foam removal method:
1. Condenser bottle mouth downward to let the foam out by itself.
2. Do not shake the condenser when there is a small amount of foam left
in the condenser. Shaking is easy to damage the glass tube in the
condenser. An
acidic liquid can be poured into the condenser to dissolve the foam.
|
|
|
Specification: |
Model: RE-201
1. Capacity of evaporating flask: 1L
2. Capacity of collecting flask: 1L
3. Vacuum: -0.098Mpa
4.Rotating speed: 0 - 120 R/min
5. Evaporating speed: ≥1.5L/H20
6.Temperature range:Room temperature-99℃
7. Motor power: 40W
8. Water bathing power: 1KW
9. Voltage: 110V |
Features: |
Rotator consist of a group of reliable
micro motor and integrated circuit control device. Under the effect of
the electronic speed regulation, it can be rotated stably within the
range of 10-120rpm, reaching the
international advanced level
1. Special fluoro rubber sealing, high corrosion resistance.
2. High evaporating efficiency & high recovery.
3. Modular design, easy to connect to other appliance.
4. Easy to install and disassemble, easy to operate & maintain.
5. The main body extensively adopts
stainless steel and aluminum alloy, firm and beautiful
6. RE-201 rotary evaporator's heating bath is lifed manually, lifting
distance is 120mm
7. Two kinds of condenser structures
for choosing, one adopts double line convection principle, used for
inorganic solvent evaporation. The other is a single line container
with a interlayer cooled by water and
dry ice, used or evaporating the organic solvent.
Using vertical condenser to save
space.
8. The rotating shaft using high
borosilicate glass, the joints using fluorine rubber framework oil seal
to seal, high tightness and better effect |
|
|
Packaging:
|
|
Shipping &
Handling Details |
Default Shipping Cost or
Free Shipping Information:
▲ Default shipping cost or free shipping service is only for the
customers from Canada or the lower 48 United States by Canada
Post, USPS or the UPS Ground. Customers from other areas or
needs other shipping ways, please contact us.
▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa,
Alaska, Hawaii, PO Boxes, APO/FPO addresses or other
countries/areas, there WILL be extra shipping costs, please
contact us for more detailed information.
▲ Please make sure your address is valid for both UPS and USPS
services. Any costs incurred because of incorrect or
undeliverable address should be undertaken by buyer.
Handling Time: Shipping is usually made in 1-3 business
days after payments cleared. Orders are processed from
Monday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties: Any sales taxes or Customs
duties are not included. If came out, they must be undertaken by
the buyer.
Damage In Shipping: Contact us First! We will work with
you to get the case resolved in the fastest method.
|
Return / Refund |
If you are not 100% happy with
your purchase, please contact Us. Please don't directly opened a
request or case without informing us, or else, we will do some
discounts on the warranty and other sales-services later on.
Hope for your understanding.
Returns & Exchanges
▲ All returns must be made within 14 days of delivery date.
Items must be in new, unused condition, with all original
materials included with the shipment. A partial refund may be
applied for opened or damaged items, depending on the condition.
▲ Items returned under the buyer’s remorse: The return shipping
fee must be covered by the buyer; The original shipping cost
will also be deducted from the refund. 15% restocking fee of the
items purchase price will be charged.
▲ Returns that are the result of our seller's error: Buyer will
receive a full refund of the item as well as shipping charges
▲ All returns require a RA (Return Authorization) number that
will be given by our seller. Please contact with us at first for
more details.
Defective & Damaged Products
▲ If product was received damaged or not as described, please
send us some pictures or videos, so we could well understand
your problem, then solve them for you ASAP. Besides, it's much
helpful for us to claim with UPS, remind our related department
to pay much more attention to packaging later on. Hope for your
understanding.
▲ Replacement or refund of defective or damaged products can
only be returned in exchange for the exact same product, or
else, the purchase price will be refunded back to your original
payment method.
▲ If an item is received damaged, customer service must be
contacted within 7 days of receiving your item. All returns
require a RA (Return Authorization) number as above.
|
Payment |
eCheck Issues: Payments
via eCheck do not clear immediately. Usually you will wait 5-7
days after checkout for it to clear. Then we will arrange
shipments for you. |
Warranty &
Feedback |
▲ 6 months' warranty for the
machines, not for the consumables. We stand behind our products
all the item, so even if your warranty period has expired, you
can still seek for service or technical support from us with low
cost.
▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller.
▲ We committee to the customer satisfaction and want to bring
you the best purchase experience. If there is any problems,
please contact us ASAP. If not, please leave us a positive
feedback as it's very important for us. Thanks very much. |
|