PRODUCT DESCRIPTION

DEEP PRIMER PRO is a deep penetrating, water-based primer preparation intended for indoor building surfaces (regardless of the degree of moisture ) and exterior of buildings. Properly applied, it raises the adhesion, strengthening capacity and standardises consistency & absorbency of the substrate, while not hindering the process of so-called " breathing ". Prevents discoloration and stains. Reduces wear of  topcoats.

It is recommended for use under high-quality latex and silicone, plain and acrylic emulsion paints, heavy vinyl wallpaper and glass fibre, waterproofing putty, plasters, acrylic, ceramic tile wall and floor and priming before pouring self-levelling floors. It can be used for a variety of construction materials, like plaster, concrete, brick, plaster, wood and wood-based materials, plasterboard.

Required under the waterproofing putty AQUA BUILD LIQUID FOIL, under silicone-acrylic paint for concrete as well as roofing paint.

Advantages:

Properly applied, it raises the adhesion of paint, standardisation and consistency of the absorbency of the substrate, at the same time does not interfere with the process of the so-called "wall breathing". In the case of fresh plaster it does not impede the ageing process, and prevents stains and discoloration of colour coating. These features are the result of the application of the particulate polymer with an extremely small particle size (so called hydrosol) that are many times smaller than those used in conventional acrylic primer. This ensures deep penetration into the porous substrate.

Surface preparation and application:

There is no special preparation of the substrate for new plaster, only traces of oil must be removed after the form work. Surface for renewal should be carefully dusted, cleaned, loose patches of paint removed, surface degreased. Completely remove old lime & dry glue paint. Eliminate algae and mould with chemical substances. Smooth surfaces are roughened with sandpaper.Fill cracks with acrylic filler; larger ones: interior – plaster, exterior and under mineral paints with cement mortar. Cover protruding, not removable steel elements with anti corrosive paint.

 Mix package contents thoroughly. Depending on the absorbency of the substrate DEEP PRIMER PRO can be diluted with water in a ratio of 1:1 to 1:4 (i.e., 1 part of the formulation, and 4 parts water). Fresh cement-lime plaster painted no earlier than 3-4 weeks after application. Avoid excess application. Do not allow the formation  lacquering and running.on the surface.

Safety precautions:

In the event of contact with skin, wash with soap and water. Flush eyes with plenty of running water. In case of irritation symptoms, contact your doctor. Keep out of reach of children. 

paint with a roller, brush or spray

use and store at temperatures not lower than +5 ° C and not higher than 30 ° C

Drying time: about 1-2 hours.

recommended number of layers: 1, in specific cases, 2

Yield: 10-12 m2 / l

cleaning tools and dilution - water

 PZH Hygienic Certificate

 Norm: PN-C-81906: 2003

12 months warranty from date of manufacture, in original undamaged packaging