NOTE: This filter set included 4 pins UV Lamp. If you are looking for 2 pins UV lamp click here

Please make sure before you purchase since we are selling botth 2 and 4 pins UV lamp.

1 set of replacement filters with following :

1 x Sediment Filter 5 micron Dirt/Rust remover

  • Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems.
  • Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.
  • Meets FDA requirements for food and beverage contact.
  • No leachable or extractable material to contaminate outflowing water.
  • Long life and increased dirt holding capacity.
  • No surface binders to reduce flow and increase change-out frequency.

1 x GAC 10 Inch Coconut shell Carbon Filter

  • Size 9 7/8 inch x 2.5 inch - Fits most standard 10 inch size housings and most reverse osmosis systems.
  • Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.
  • Thick Wall Coconut Base Carbon Filter Media - 100% coconut shell carbon Designed For maximum contact between the water and carbon.
  • 5 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water.
  • Operation Temperature: 40°F to 125°F

1 x CTO Carbon Block Filter

  • Size 9 7/8 inch x 2.5 inch Fits most standard 10 inch size housings and most reverse osmosis systems.
  • Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water.

1 x 5-in-1 pH+ Alkaline/Far Infrared/Remineralization Filter

1 X Reverse Osmosis Membrane 

  • 50 GPD R.O. Membrane at 60 PSI
  • We Suggest to change your membrane every 2 year
  • To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals).

1 X Refillable Inline Mixed Bed Deionization Filter (Double Ended).

  • Clear Housing, Refillable Cartridge (Double Ended)
  • Filter Media: Mixed Bed ion exchange resin
  • Max Flow: 0.5 GPM
  • Max Pressure: 125 PSI
  • Max Temperature: 100°F
  • Dimensions: 11 inch x 2 inch
  • Inlet/Outlet: 1/4 inch FPT
  • Weight: 13 oz

1 X  6 W UV bulb for UV Sterilizer

    • NOTE: This lamp has a four post connectors on a cable from one end. Please check the lamp in your UV sterilizer before ordering
    • If your lamp has two posts on either end check out
    • 6 W UV bulb
    • Light Power:6 W
    • Light tube No. G6 T5 for UV Sterilizer 
    • 110 V
    • Light lifetime: 9000 hours
    • Made in Poland

1 x Standard Inline Carbon Cartridges

  • Dimensions: 2 inch x 10 inch - Fits standard Reverse Osmosis Systems - 10 Micron Nominal
  • Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt.
  • Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers
  • Max Flow: 0.5 GPM
  • Max Pressure: 125 PSI
  • Max Temperature: 100°F
  • Inlet/Outlet: 1/4 inch NPTF thread (fitting is required)

Total 8 filters, each individually wrapped.


5-stage-standard-system-slide07-filtration Gac Carbonblock-CTO 3-in-1-literaturepost-carbon maxwater-terms