Alps MD Compatible
Spot Color Ink Printer Cart. Light Gray ZK-MDC-LGM1, 1 each
Light Gray Spot-Color
MicroDry Ink Cartridge for Alps MD Printers
NEW
All of our Alps compatible cartridges are new stock.
Details
Manufacturer: Elephant’s Rocket
Part # ZK-MDC-LGM1
Color: 1-each; Spot Color Light Gray MD Cartridge
Compatible Printer(s): Alps: MD Series OKI: DP Series Kodak: First Check
SPOT-COLOR INK USE INSTRUCTIONS
. Bar-code of spot color ink Light Gray is No.0,
which is same as Black ink(MDC-FLCK, MDC-FLK3). In other words, MD printers
recognize the Light Gray ink as Black ink.
Note: Spot-Colors are unable to be printed on decal paper sharp and clearly
at 600dpi and 2400dpi Black printing.
2. In order to set-up 1200dpi printing follow the directions below, to print with good resolution:
Printer Properties…
Document Type: Grayscale
Media type: Laser Paper
Check 'Print On Backside'. You must stop the paper curl reforming process by
checking 'print on Backside'.
Print Settings…
Print Mode: Standard Color
More Settings...-->Print Quality
Resolution: 1200 dpi
Please note that [Paper Source (Automatic Feed or Manual Feed)] should be the
same as the printing of other inks. You can manually select it at Paper tab.
Do not use “Stop Curl” process for decal printing.
Under Printing Properties, check 'Print On Backside'. Check “paper curl” to
turn-off. 'Print On Backside' also turns off “paper curl” as well.
To print with the best resolution on decal paper, re-label bar-code to one of
the Metallic colors, such as Metallic Gold MDC-METG, Metallic Silver MDC-METS,
Metallic Red MLC-SMTR or Metallic Blue MLC-SMTB, so you can print the orange
ink on the decal paper clearly.
Please note: Bar-code
labels from used ink cartridges should be attached firmly using double faced
adhesive tape.
3. Overprinting works only when the Spot-Color Inks are used over other ink
such as Cyan MDC-FLCC, Magenta MDC-FLCM and Yellow MDC-FLCY. Do not attempt to
print over Spot Color Inks as other ink will not adhere correctly.
4. Same as original Alps inks, there is no problem with clear lacquer finish,
water-base clear and urethane coating.
|