Kindly Note: This product is similar to the WS2812B protocol, and plenty of code is available for Arduino and other platforms. And can be controlled by WS2811/WS2812B DC5V controller.

IP21: Non- waterproof

IP65: Waterproof in Silicon Coating

IP67: Waterproof in SiliconTube

30LED=30leds/m

60LED=60leds/m

144Led=144leds/m

1m= 1 meter

2m= 2 meter

5m=5 meters

LED source :5050SMD RGBW/WW/WWA built-in SK6812 chip(WS2811 IC)

Voltage(DC):5V

PCB Color: White PCB/Black PCB

Power: 30LEDs/meter ---------9W / Meter

60LEDs/meter ---------18W / Meter

144LEDs/meter -------43.2W / Meter

LED type :SMD5050

IC type :SK6812(similar to WS2812B)

LED/per meter: 30, 60,144leds/Meter (each LED is separately controlled)

IC/per meter: 30, 60,144IC/Meter (1 IC drives 1 led chip)

Pixel /per meter :30, 60,144Pixels/Meter

Grey Grade: 256

IP21,IP65 ,There is a  self-adhesive tape at the back side. You can install easily

Application:

Applicable for automobile and bicycle decoration, border or contour lighting

Widely used for home decoration use, hotels, clubs, shopping malls

Architectural decorative lighting, boutique atmosphere lighting

Extensively applied in Backlighting, concealed lighting, channel letter lighting

Emergency & security lighting, advertisement sign lighting

Decorative lights for holiday, event, show exhibition

Package included:

According to the products you buy

SK6812RGBW/RGBWW/RGBNW is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of thepixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator. The data protocol being used is unipolar NRZ communication mode. The 32-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed. The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

SK6812 WWA(White+Warm white+Amber) is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The controlcircuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator. The data protocol being used is unipolar NRZ communication mode. The 24-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixelis reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limitedby signal transmission speed.The LED has a low driving voltage (which allows for environmental protection and energy saving),high brightness, scattering angle, good consistency, low power,and long life. The control circuit is integrated in the LED above.