Amal Carburetor 930 MK1 Premier Concentric 30mm Carburetor Set for Triumph T120 & T140 Bonneville

Pair - Left & Right Amal Premier Carburetors Set up for Triumph T120 & T140 Bonneville motorcycles 200 main jet .106 needle #3 slide This pair of AMAL MKI Premiere Aluminum Carburetors is set up and ready-to-go right out of the box. They are jetted for vintage Triumph T120 650cc and T140 750cc Bonneville motorcycles, which are dual carb. These come equipped with a 200 main jet, .106 needle and a #3 slide. This includes one left-hand and one right-hand carburetor. If you want the best for your Triumph, this is the carb set to buy! No guesswork on jetting or slide cutaway, these are good to go. The 900 series AMAL MKI Concentric carburetors have been re-designed to improve performance and wear. The new carburetor incorporates changes in materials which reduces the rate of slide and body wear and a precision engineered idle circuit. This improves the pick-up performance from idle and reduces fuel consumption. The precision manufactured forged alloy, Hard Anodized Throttle Slide has a low friction surface for smoother operation and greater wear resistance. The ethanol resistant, puncture proof StayUp Float and Viton tipped alloy Needle Valve improve control of the fuel flow. These newer versions are now offered with an aluminum body rather than potmetal, offering weight savings (nearly a pound has been shaved off), and improved wear characteristics that the aluminum slides had not fully addressed. Many old Amal carburetors are physically worn out. Common problems include a worn slide and/or a worn bore in the carburetor, causing the slide to be loose. Another common problem is that the mounting flange was overtightened, warping the body of the carburetor. All of these issues cause air to leak past the slide, causing erratic idle, hard starting and the like. These carburetors fix those issues, as they are brand new from Amal in England, original supplier of carburetors for Triumph motorcycles. Make sure to check out our selection of Amal carburetors, jets, repair kits, and other components.Note: For your reference, a right side carb has the tickler on the right side of the carb body, on a left side carb the tickler is on the left. Note: This carb does not have any threads in the lid for choke block off plug Note: There are no returns on carburetors, electrical items, full frames, hardtails or made-to-order items (such as magnetos) unless there is a manufacturer’s defect.

Amal Carburetor 930 MK1 Premier Concentric 30mm Carburetor Set for Triumph T120 & T140 Bonneville

  • Pair - Left & Right Amal Premier Carburetors
  • Set up for Triumph T120 & T140 Bonneville motorcycles
  • 200 main jet
  • .106 needle
  • #3 slide

This pair of AMAL MKI Premiere Aluminum Carburetors is set up and ready-to-go right out of the box. They are jetted for vintage Triumph T120 650cc and T140 750cc Bonneville motorcycles, which are dual carb. These come equipped with a 200 main jet, .106 needle and a #3 slide. This includes one left-hand and one right-hand carburetor. If you want the best for your Triumph, this is the carb set to buy! No guesswork on jetting or slide cutaway, these are good to go.

The 900 series AMAL MKI Concentric carburetors have been re-designed to improve performance and wear. The new carburetor incorporates changes in materials which reduces the rate of slide and body wear and a precision engineered idle circuit. This improves the pick-up performance from idle and reduces fuel consumption. The precision manufactured forged alloy, Hard Anodized Throttle Slide has a low friction surface for smoother operation and greater wear resistance. The ethanol resistant, puncture proof StayUp Float and Viton tipped alloy Needle Valve improve control of the fuel flow. These newer versions are now offered with an aluminum body rather than potmetal, offering weight savings (nearly a pound has been shaved off), and improved wear characteristics that the aluminum slides had not fully addressed.

Many old Amal carburetors are physically worn out. Common problems include a worn slide and/or a worn bore in the carburetor, causing the slide to be loose. Another common problem is that the mounting flange was overtightened, warping the body of the carburetor. All of these issues cause air to leak past the slide, causing erratic idle, hard starting and the like. These carburetors fix those issues, as they are brand new from Amal in England, original supplier of carburetors for Triumph motorcycles.

Make sure to check out our selection of Amal carburetors, jets, repair kits, and other components.

Note: For your reference, a right side carb has the tickler on the right side of the carb body, on a left side carb the tickler is on the left.

Note: This carb does not have any threads in the lid for choke block off plug

Note: There are no returns on carburetors, electrical items, full frames, hardtails or made-to-order items (such as magnetos) unless there is a manufacturer’s defect.