Hey! Up for sale today i have these fan grills for your pc build. These are mainly an aesthetic piece to dress up your fans. They work best on led fans as the leds will light up the pattern on the fan grill. They can be mounted using your fans screws, zipties, or double stick tape. Please read below for more specific details.

--Made from 1/8th laser cut black acrylic. (ask about other colors if needed)
--Sized at 360mm x 120mm for full size front panel or radiator fans. (ask about other size fan grills)
--No hardware is included, use what comes with your fans or purchase the appropriate hardware for your application.
--outer holes are fixed while center holes are ovaled to allow mounting freedom.
--fan bolt spacing is the standard 15mm apart

***Important notes***

--front of panel has high gloss finish. The backside will have some slight burn marks around the cuts, and wont be as visually perfect. Always position the the better side outwards.

--These do cause some increased wind noise if put on the intake side, something to consider.

--over tightening screws may cause the acrylic to crack, be responsible.
--feel free to contact me for fan grills in the other common sizes, or if you need any different colors.


Thanks!