Gigabit Ethernet Active PoE Splitter DC 5V 5.5x2.1mm Plug

5V 2.4A (Max. 12watt)

Compliant with IEEE802.3af

With 2.5KV isolation

Note:

This POE splitter must be connected with POE Switch or 48V POE Injector so that it can supply power to a connected DC5.5*2.1 Port IN DC 5V device  
Power Output Port: 5.5*2.1mm DC Port

Power Output Voltage: DC 5V 2.4A(Max. 12 Watt)

 

RJ45 female INPUT Port:
Support the IEEE 802.3af/802.3at the PoE Switch 
Support the IEEE 802.3af/802.3at the POE Injector
Support DC44V-57V Unsolicited PoE Switch 
Support DC44V-57V Unsolicited POE Injector

 

Specification:

Compliant with IEEE802.3af/802.3at
Isolation: 2.5kV
Power Input:  DC44~57V
Power Output: DC5V 2.4A
Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data Output Port: RJ45 Male
Power Output Port: 5.5*2.1mm DC Port Plug
Data Transfer Rate:  10/100/1000 Mbps 
Devices will be detected before poe input
Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Body size: 80 x 27x 22 mm
DC cable length：165mm
RJ45 Modular Plug cable length：155mm
Weight : 55g

Operation Temperatue:-20℃ ~ 45℃
Storage Temperature:-30℃ ~ 70℃

Notice:

Yellow LED(power) will be light up when micro USB connects to the device.

Green LED(data) never light in any circumstances,two reasons are below,

1.This splitter allows data to input and output through its RJ45 port, but no indicator on this splitter indicates the status of the data transfer. 
Only one power indicator shows the working status of the POE.

2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.

 

Item Included:

 Gigabit DC5V 2.4A Active PoE Splitter(5.5X2.1mm Power Plug) x1