ERCuSi-A Silicon Bronze TIG Welding Rod - 36" x 0.035"- (10 Lb)
ERCuSi-A Silicon Bronze TIG Welding Rod - 36" x 0.035"- (10 Lb)
- Silicon Bronze is a copper alloy Rod containing 3% silicon and used for TIG or Oxyacetylene Welding of copper, brass, bronze, steel and cast iron.
- Silicon Bronze is best known for welding plain or galvanized steel sheet metal in the manufacturing of steel cabinets, metal furniture and ductwork.
- Weld deposits demonstrate high strength, excellent corrosion resistance, and good weldability, making this wire suitable for surfacing parts in corrosive environments - Tensile Strength: 51,000 psi
- Diameter: 0.035" (1.2mm) - Length: 36"
- You will receive 10 Lb of Rods
ERCuSi-A - 36"
x 0.035"- (1 Lb)
ERCuSi-A - 36"
x 0.035"- (2 Lb)
ERCuSi-A - 36"
x 0.035"- (5 Lb)
ERCuSi-A - 36"
x 0.035"- (10 Lb)
ERCuSi-A - 36" x 0.045"- (1 Lb)
ERCuSi-A - 36" x 0.045"- (2 Lb)
ERCuSi-A - 36" x 0.045"- (5 Lb)
ERCuSi-A - 36" x 0.045"- (10 Lb)
ERCuSi-A - 36" x 1/16"- (1 Lb)
ERCuSi-A - 36" x 1/16"- (2 Lb)
ERCuSi-A - 36" x 1/16"- (5 Lb)
ERCuSi-A - 36" x 1/16"- (10 Lb)
ERCuSi-A - 36" x 3/32"- (1 Lb)
ERCuSi-A - 36" x 3/32"- (2 Lb)
ERCuSi-A - 36" x 3/32"- (5 Lb)
Data Sheet:
ANSI/AWS A5.7 Class ERCuSi-A
ASME SFA-5.7 Class ERCuSi-A
Description and Application
Silicon Bronze is a copper alloy wire containing 3% silicon and used for GMAW, GTAW or Oxyacetylene Welding of copper, brass, bronze, steel and cast iron.
Silicon Bronze is best known for welding plain or galvanized steel sheet metal in the manufacturing of steel cabinets, metal furniture, and ductwork.
Weld deposits demonstrate high strength, excellent corrosion resistance, and good weldability, making this wire suitable for surfacing parts in corrosive environments.
Chemical Composition of ERCuSi-A:
|
Cu |
Zn |
Fe |
Si |
Al |
Pb |
Mn |
Sn |
Others |
|
Balance |
1.0 |
0.5 |
3.03 |
0.0025 |
0.0044 |
1.5 |
1.0 |
0.214 |
Single values are maximum unless otherwise specified.
Approximate Melting Temperature: 1866°F (1019°C)
Average As-Welded Brinell Hardness: 80 - 100 Brinell
Tensile Strength: 51,000 psi
Density: 0.308 lbs/in3
Welding Parameters:
MIG Welding:
|
Recommended GMAW (MIG) Welding Parameters - DCEP (DC+)3,4,6 *Spray Transfer: 100% Argon on Thin Sections; 75% Argon 25% Helium on Thicker Sections |
||||
|
Wire Diameter |
Amperage |
Volts |
Wire Feed (ipm) |
Flow Rate (CFH) |
|
0.023" (0.6mm) |
60 - 120 |
21 - 22 |
460 - 580 |
20 - 25 |
|
0.030" (0.8mm) |
130 - 160 |
21 - 24 |
450 - 525 |
20 - 30 |
|
0.035" (0.9mm) |
165 - 190 |
24 - 25 |
420 - 460 |
25 - 30 |
|
0.045" (1.143mm) |
205 - 235 |
26 - 28 |
295 - 325 |
30 - 35 |
|
1/16" (1.6mm) |
270 - 310 |
27 - 31 |
190 - 275 |
35 - 40 |
TIG Welding:
|
Recommended GTAW Welding Parameters 5,6 *100% Argon - DCEN/DC- or ACHF -2% Thoriated, 2% Ceriated, 2% Lanthanum or Rare Earth Tungsten |
||||
|
Wire Diameter |
Tungsten Size |
Amperage |
Voltage |
Flow Rate (CFH) |
|
1/16" (1.6mm) |
1/16" |
80-170 |
12 |
20 |
|
3/32" (2.4mm) |
3/32" |
140-275 |
20 |
|
|
1/8" (3.2mm) |
1/8" |
200-375 |
25 |
|
|
5/32" (4.0mm) |
5/32" |
260-475 |
30 |
|
Oxyacetylene Welding:
The oxyacetylene gas flame should be slightly oxidizing (neutral) to keep the weld puddle small in order to allow fast solidification and this will also minimize cracking; use a borax type flux both before and during welding; preheating is not recommended.
5 When TIG welding with Silicon Bronze, best results are obtained by keeping the weld pool small; Preheating is not required; welding can be done in all positions, but the
flat position is preferred
6 Recommended parameters will be affected by changes in position, base metal, equipment and shielding gas.
About Us
Mundaka Technologies, Inc is a US-based company with an inherited expertise of more than 40 years in the welding, cutting and industrial gases business. We serve the United States and the Latin American markets from our facilities in Fort Lauderdale FL. All of our products are selected with quality and affordability in mind. Our customer service team is always available and committed to answering our client's questions and needs. NO Answering Machines, NO Excuses.
Payment
We accept all major payment methods: PayPal, Visa, MasterCard, AMEX, Discover, and Bank Transfers. We charge 7% sales tax on all orders shipping within the State of Florida. We sell with tax exemption if we are provided by the customer with a valid Florida resale certificate.
Shipping
We ship the same business day for orders placed before 12:00 EST. USPS Priority Mail (1-3 days), FedEx and UPS Ground (1-5 days), are our preferred shipping methods and delivery dates may vary according to tho the final destination of the order. For smaller and lighter items we use USPS First Class (1-4 days). We offer free shipping to the 48 contiguous continental states.
Returns
If you are not happy with your product, just request a return on eBay or get in contact with us, We will accept your return and refund your payment, no questions asked!. If you changed your mind or bought a product by mistake, Just send it back! we will refund your payment. Is the product that you bought does not fit your current equipment, No problem, just call us and we will help you to find the right equipment for you and exchange it. We are committed to providing our customers with a solution.
Disclaimer
Mundaka Technologies Inc offers products that can operate at high temperature, high pressure, and high voltage/amperage. These products are intended for professional or trained users. Mundaka Technologies does NOT sell any products intended to diagnose, treat, cure, or prevent any disease and the products bought from Mundaka Technologies Inc should never be used as a reference to measure or dosage medical oxygen or any other medical gases or substances to humans or animals. Mundaka Technologies, Inc. assumes no liability for misuses of this products. Some of the products offered here might be described as "Compatible with" other manufacturer´s equipment and brands. It is not in the Mundaka Technologies Inc intentions to resemble, copy, counterfeit or violate trademarks, patents, brands or any other form of intellectual property owned by other companies not affiliated, associated, authorized, endorsed by, or in any way officially connected to Mundaka Technologies Inc.
