To buyers from the United Kingdom
Please note that since the UK has left the EU, orders above a value of 130 GBP / 150 EUR are net and you will have to pay additional VAT and customs duties (Additional costs for duty processing and delivery may apply.) on import.
![](https://maxxcount.de/pub/media/ebay/temp/ctx/ctx_kopfzeilen_teaser.jpg)
Radio Retrofit Interface for Mitsubishi Eclipse Endeavor Galant 2006-12
Axxess CAN-BUS Interface AXTO-MI1 is required to replace the Mitsubishi original radio with a retrofit radio so that available functions remain usable.
- Necessary when replacing the factory radio against a retrofit radio / navi
- Easy installation thanks to pre-assembled cable set
- Especially for vehicles with original factory amplifiers
- Keeps CAN data bus communication intact
- Continues to provide amplifier functions:
- Adjusting the fader
- Balance adjustment
- Eliminates "COM ERROR" message
![](https://maxxcount.de/pub/media/catalog/product/a/1/a18143_axxess_mito-01_anschluesse.jpg)
Axxess AXTO-MI1 CAN-BUS Interface for Mitsubishi from 2006 to 2012 with original amplifierThis easy-to-install CAN-BUS Interface is required to replace the original factory radio by an "Aftermarket" device (retrofit radio, eg from Alpine , Kenwood, Pioneer, etc.), so that the factory-installed amplifier can still be used remains. Preservation of the following CAN bus functionsThis Axxess AXTO-MI1 CAN BUS adaptor provides the following amplifier signals & functions for a radio / navi retrofit:
Why the CAN-Bus Interface ?Today's radio or navigation systems reproduce not only the music of the radio or navigation commands, but are deeply networked with the vehicle electronics. This communication structure, called the CAN bus, connects control units, sensors, multi-media devices and much more. Therefore, a vehicle-specific CAN bus Interface required when replacing the factory radios / navis to keep the communication of all devices integrated into the CAN bus upright / intact. |
étendue
car radioObtain the following function
- Adjusting the fader
- Balance adjustment
- CAN-BUS Interface ( Axxess AXTO-MI1 )
- Vehicle & device-specific connection cable
Kompatibel mit:
Following Mitsubishi with original factory amplifier:
The article is compatible with the vehicle configurations listed below.
Make | Model | Year | Radio |
---|---|---|---|
Mitsubishi | Eclipse | 2006 | alle |
Mitsubishi | Eclipse | 2007 | alle |
Mitsubishi | Eclipse | 2008 | alle |
Mitsubishi | Eclipse | 2009 | alle |
Mitsubishi | Eclipse | 2010 | alle |
Mitsubishi | Eclipse | 2011 | alle |
Mitsubishi | Eclipse | 2012 | alle |
Mitsubishi | Endeavor | 2007 | alle |
Mitsubishi | Endeavor | 2008 | alle |
Mitsubishi | Endeavor | 2009 | alle |
Mitsubishi | Endeavor | 2010 | alle |
Mitsubishi | Galant | 2007 | alle |
Mitsubishi | Galant | 2008 | alle |
Mitsubishi | Galant | 2009 | alle |
Mitsubishi | Galant | 2010 | alle |
Mitsubishi | Galant | 2011 | alle |
Mitsubishi | Galant | 2012 | alle |
![](https://maxxcount.de/pub/media/catalog/product/a/1/a18143_axxess_mito-01_anschluesse.jpg)
![](https://maxxcount.de/pub/media/catalog/product/a/1/a18143_axxess_mito-01_lieferumfang.jpg)