The TRIRON series controllers are modular-designed products based on nine MPPT solar controller models. The main unit (Power Module) is a solar controller which can be integrated with different display and interface modules to meet a variety of functional requirements. Among them, the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.

Optimizing the MPPT control algorithm further to ensure minimum power point loss rate and loss time, and quickly track the maximum power point to obtain the maximum solar energy of PV array in any environment. Meanwhile,TRIRON controller adds automatic limit function of charging power and current, so that the controller would not be damaged even connecting oversized PV modules (the
actual working value would not be higher than rated value).

The controller adopts the three-stage charging mode, and has perfect electronic protection function, which can effectively extend the battery life, improve the system performance, and ensure the system safety, stability and long-term operation. TRIRION controller can be widely used in RV, telecommunication base station, household system,field monitoring, etc.
 
 
Product Features
Self-identifying, load the driver for each module
Support the hot swapping function(only for same model)
Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
Modular design, varied combination to meet different requirements
Ultra-fast tracking speed, and high tracking efficiency ≥99.5%
Accurately tracking and recognizing of multiple MPP
Peak conversion efficiency of 98%
Auto limit function of charging power and charging current
Compatible with lead-acid batteries and lithium batteries
Wide MPP operating voltage range
Full load operation during the working temperature range
Auto reduce power function when charging in high temperature
Multiple load work modes
Battery temperature compensation
Real-time power statistics recording function
Multiple LCD and LED display modules optional
Master-slave interface module design,simultaneously view the controller and inverter operating data
Dry contact design, remotely switch on/off external equipment
Dual USB design, supply DC power for electronic equipment
Perfect electronic protection function
 
 
Protection function
 PV over current protection PV short circuit protection Lithium battery low temperature protection
 Night reverse charging protection Battery reverse polarity protection PV reverse polarity protection
 Battery over discharge protection Battery over heat protection  Battery over voltage protection
 Load short circuit protection  Load overload protection Controller overheating protection
 
Module introduction
 
Display module DB1 LED indicator display the controller operating status and the battery capacity Pressing the button to manual switch on/off load and clear error.
DS1 LCD display the basic operating data of the controller including : voltage, current, power etc. , and set part parameters.
DS2 LCD display the detailed operating data of the controller including: voltage, current, power, capacity etc., and set part parameters.
Interface module UCS Daul USB output,provide power to DC devices;PC software & mobile APP can remotely monitor the controller status through COM port
 
Electrical parameters
 
Model
TRIRON 1206N TRIRON 2210N TRIRON 3210N TRIRON 4210N
Nominal system voltage 12/24VDC auto work
Rated charge current 10A 20A 30A 40A
Rated discharge current 10A 20A 30A 40A
Battery input voltage range 8~32V
Max. PV open circuit voltage TRIRON**06N : 60Vat Min operating environment temp; 46Vat 25℃environment temp
TRIRON**10N :100Vat Min operating environment temp; 92Vat 25℃environment temp
MPP voltage range TRIRON**06N : (Vbat+2V)~36V
TRIRON**10N : (Vbat+2V)~72V
Max.PV input power 130W/12V
260W/24V
260W/12V
520W/24V
390W/12V
780W/24V
520W/12V
1040W/24V
Battery type Sealed / Gel / Flooded;LiFePO4 / Li-NiCoMn / User
Lithium battery(LiFePO4 /Li-NiCoMn/User)
◆ Lead-acid batteries Equalize charging voltage
Sealed: 14.6V, Flooded: 14.8V,
User-defined: 9~17V
Boost charging voltage
Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V,
User-defined: 9~17V
Float charging voltage Gel /Sealed /Flooded: 13.8V,
User-defined: 9~17V
Low voltage reconnect voltage Gel /Sealed /Flooded: 12.6V,
User-defined: 9~17V
Low voltage disconnect voltage Gel /Sealed /Flooded: 11.1V,
User-defined: 9~17V
◆ Li-battery Boost charging voltage
LiFePO4:14.4V;Li-NiCoMn:12.4V;
User:9-17V
Float charging voltage
LiFePO4: 13.6V;Li-NiCoMn:11.8V;
User:9-17V
Low voltage reconnect voltage
LiFePO4:12.4V;Li-NiCoMn:10.40V;
User:9-17V
Low voltage disconnect voltage
LiFePO4:11.0V;Li-NiCoMn:9.20V;
User:9-17V
Lithium battery LiFePO4(4S;8S)/Li-NiCoMn(3S;6S)
Self-consumption
≤14mA(12V)
≤15mA(24V)
● Controller can not auto recognize system voltage when battery type is "lithium battery“, please confirm the
system voltage before use.
※ Without equalize charging when the battery type is "lithium battery".
◆ Technical data for 12V system at 25 ℃, twice in 24V system.
Discharge circuit pressure drop ≤0.18V
Temp. compensation -3mV/℃/2V (Lithium battery has no Temp. compensation)
Grounding Common negative
RS485 communication interface 5VDC/100mA
USB interface 5VDC/2.2A(total)
Relay interface 30VDC/1A
LCD backlight time 60s(default)
※The Temp. compensation coefficient is 0 When the battery type is "lithium battery“ and can not be changed
 
Environment parameters
 
Working environment temperature -25℃~+55℃(with LCD)
-30℃~+55℃(without LCD)
Storage temperature range -30℃~+70℃
Humidity range ≤95%,(N.C)
Enclosure IP30
※ In the working environment temperature range ,Controller can be full load operation .
 
Mechanical parameters
 
Model TRIRON1206N TRIRON2210N TRIRON3210N TRIRON4210N
Dimension 135×180.8×47.3mm 150×216×56.7mm 158×238.3×62.7mm 183×256.8×66.7mm
Terminals 12AWG(4mm²) 6AWG(16mm²) 6AWG(16mm²) 6AWG(16mm²)
Net weight 0.9kg 1.3kg 1.8kg 2.4kg
 
 
Accessories (optional)
 


On 13-May-2024 at 22:22:00 BST, seller added the following information:

DataCaciques