iShoot All Metal 150mm Macro Focusing Rail
Slider
Millimetric Precision, Perfect Focusing With Clamp of Arca-Swiss / RRS Standard Fit Bottom is Quick Release Plate of Arca-Swiss / RRS Standard Fit |
Features: |
1. Main body made of Aviation Aluminum, CNC precisely
machined, surface anodized, the maximum size with knob is about 203mm long, 106mm wide, and 34mm high, net weight is about 420g; |
Specifications: |
Outline size: about 203mm long, 106mm wide, and 34mm high
(including knob) Net weight: about 420g Slide length: about 150mm Regulating range: about 118mm Lap length: about 1mm Maximum load: about 3.4kg |
Matters Needing Attention: |
1. When using, if it has been screwed to the end, please do
not screw it any more, to prevent the clamp off the slider from causing damage, should turn back two circles for next use; 2. The clutch is only used in the fast adjustment; please pay attention to the gear meshing when using, daily use to keep the gear clean, prevent premature wear; 3. When only using one slider, recommend using it with ballhead; when using two in combination, not limited by it, but using with ballhead would be more convenient. |
Package Including: |
1 x All Metal 150mm Macro Focusing Rail Slider IS-MFR150 (Note: The slider need be used with quick release plate which is not included in the listing, and the other items in the photos not listed here are for illustrating only, not included) |
|
All-metal Quick Release Plate QS-80
Universal to Camera Body and Lens
Compatible with 39mm RRS / ARCA-SWISS Fit Tripod Head and Clamp |
Features: |
1. Main body made of all-metal materials, CNC precision machining, non-slip rubber surface; net weight of 50g, 80mm long and 39mm wide; 2. With Arca 39mm standard interface, compatible with Arca-Swiss / RRS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE ball heads of RRS Standard Interface, suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS- QJ64 / IS-JZ60BK / IS-70BK / IS-JZ80BK clamp, etc. 3. Built-in slot of 50mm long, standard 1/4" stainless steel screw for locking into the bottom of the camera or lens tripod mount ring; designed with camera strap hole; 4. Suitable for Canon, Nikon, Sony, Pentax, Olympus, Panasonic, Samsung and other cameras with standard 1/4" screw hole in the bottom; and support for lenses whose tripod mount ring’s bottom length less than 80mm, for example, lenses less than 70-200mm/f2.8,300mm/f4, and 400mm/f5.6. |
Package Including: |
1 x iShoot Quick Release Plate QS-80 (The other items in the photos not listed here are for illustrating only, not included) |
|