Goulds JRS Shallow Well Jet Pump

This shallow well jet pump comes with a built-in jet assembly, which eliminates the need for a separate shallow well adapter, for the maximum lift of 25 feet. It has a back pullout design that allows disassembly of the pump for service without disturbing piping.

Includes:

• Pump with integral shallow well jet (nozzle and venturi)
• Motor
• Pressure switch (20 - 40 PSI)
• Tubing

Features

• 1-1/4" NPT suction and 1" NPT discharge
• Pressure switch preset at 20 - 40 PSI
• Two compartment motor for easy access to motor wiring and replaceable components
• Nozzle clean out plug in the pump case
• Corrosion-resistant, engineered plastic tubing, and fittings are easily removed for cleaning
• Premium O-ring design fittings need only be hand tight to seal
• O-ring casing seal
• Drain plug for ease of winterizing and maintenance
• Seal housing is engineered composite, corrosion and abrasion resistant
• Impeller is corrosion and abrasion resistant, F.D.A. compliant, glass-filled Noryl
• Diffuser (Guidevane) is F.D.A. compliant, injection molded, food grade, glass-filled Lexan for durability and abrasion resistance
• Tubing and fittings are F.D.A. compliant engineered plastic is corrosion and U.V. resistant
• Motor can be operated continuously without damage
• Built-in overload with automatic reset
• Electro-coat paint process is applied inside and out, then baked on for corrosion resistancea
• After initial priming, the pump has the ability to reprime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve

Applications

• Homes
• Cottages
• Booster service

Specifications:

• Brand: Goulds
• Mfg. Number: JRS5
• Series: JRS
• Product Type: Shallow well jet pump
• Application: Home/Cottage/Booster service
• Horsepower: 1/2 HP
• Voltage: 115/230 Volts
• Phase: 1
• Frequency: 60 Hz
• Speed: 3500 rpm
• Suction Connection: 1-1/4" NPT
• Discharge Connection: 1" NPT
• Flow at 5 ft (30 psi): 13.3 gpm
• Flow at 10 ft (30 psi): 12 gpm
• Flow at 15 ft (30 psi): 10 gpm
• Flow at 20 ft (30 psi): 8.5 gpm
• Flow at 25 ft (30 psi): 6.5 gpm
• Maximum Shut Off Pressure: 64 psi
• Pump Casing: Cast iron
• Impeller Material: Glass filled Noryl
• Motor Shaft Material: Stainless steel
• Thermal Protection: Yes
• Maximum Temperature: 140°F
• Pump Width: 9.15"
• Pump Height: 8"