***PINS 7 & 8 ARE SOLDERED***
This PA Soft unit is built to be ready to go upon receipt. Included on the USB drive are video and print instructions on how to set up the software on any Windows OS version. Contact email is included, and technical support via Teamviewer is available if needed. If you're contemplating buying one of these units, they're powerful tools to aid in ownership of a superb era of motor vehicles. We personally own M6x powered E34, E38 and E39 cars(sold our M62b46 E53). Buy with confidence from folks that know these cars well.
Works with Windows XP, Vista, 7, Windows 8, Windows 10.
We can provide remote support if needed.
Package
Contents:
USB Cable
Scanner Device
USB with Software
General
Functions include:
Determine chassis
number, model, engine, gearbox and so forth
Identification
Data
Odometer value
VIN and ADFG
Programming
information
Error Codes (DTC)
Reading
and Saving Functions:
Program memory
EEPROM
Coding Data
DTC and DTC
Shadow-memory
Live Data
Programming info
Copying ZCS (IKE
- EWS) and FA (IKE - LCM) coding
And much more...
Unlock
Functions:
DTCs description
in DME MS43.0, EWS3, SRS MRS4
Clearing DTCs in
same units
EWS-DME
synchronization code in DME MS43.0
Live data in DME
MS43.0, EWS3, SRS MRS2 and MRS4
Status of all
keys in EWS3
EWS3 coding data interpretation
Equipment
correction in SRS MRS4
**Will
Work on the Following OBDI & OBDII BMW Models(functions limited by what’s
available in each module)
1992
- 1999 E36: 3-Series
1999 - 2006 E46: 3-Series
1996 - 2003 E39: 5-Series
1995 - 2001 E38: 7-Series
2000 - 2006 E53: X5 ; E83 - X3 ; E85 - Z4
** Will have less features on BMWs older than 1998
For cars that are have the 20 pin connection under the hood
you would need OBD2 female to 20pin Adapter Cable(not included in this listing)
Below are some
general tips and tricks for commonly sought changes/adjustments in various
modules. Please note that not all modules may have the same function lists as
shown below. This varies by chassis/engine/manufacture year.
ZKE
Options: To do any of the functions in the ZKE section: -
select "Coding data”
To activate the alarm optics without having a physical alarm: -check DWA -check the options with "optics"
*note if you have bits and pieces of the oem alarm, you may enable those
options
To
activate a OEM alarm:
-check DWA
-check DWA interior sensor
-uncheck DWA interior sensor, rear (unless you have a convertible which has a
front and rear interior sensor)
-check DWA tilt alarm sensor -check the options with "optics"
and "acoustics"
*note you must have all 3 (4 for convertibles) pieces to the alarm
otherwise your car will throw a code.
e.g. you have the siren and motion sensor but no tilt; your DWA will show a
fault and will not arm. Siren will still go off if doors are breached.
To enable remote closing windows:
-default "Opening (remote control)" is checked and "Locking
(remote control)" is unchecked
-check "Locking (remote control)" to enable closing with remote
*note the lock button closes and unlock opens the windows upon holding of the
key
To enable one click to unlock all doors:
-default "Selective" is checked. This allows one click of the unlock
button of the remote to unlock the drivers door. A second click unlocks
remainder passenger doors
-check "No" to unlock all doors with one press of the unlock button
To
change the tilt of the passenger mirror when in reverse:
-default "Memory" is unchecked
-set mirror switch to passenger. The mirror will tilt to your personal
position.
-to set your position, have switch on passenger side, and adjust your mirror
while in reverse gear.
*note if "Memory" is checked mirror switch must be
set to passenger for option to work. Switching to driver will
disable the auto-tilt.
**note if "Memory" is unchecked mirror switch must
be set to driver for tilt to work (by default it tilts to the
maximum amount).
Switching to passenger will disable the auto-tilt.
EWS
Options: To check the number of keys you have used:
-select key status
-you may also disable keys if you lost them from this menu as well note
To view live data: -select live data
To DISABLE the clutch switch:
-select "Coding data"
-select "Settings and manufacture settings"
-select Manual transmission note* only for manuals note**
this allows you to start the car without having to depress the clutch
SRS Options: To view live data about your airbags: -select
live data
To DISABLE seat occupancy sensor:
-select "coding data"
-select "Equipment"
-uncheck "Seat occupancy recognition"
To DISABLE seat belt light:
-select "coding data"
-select "Equipment"
-uncheck "Seat-belt buckle switch"
IKE Options: In
the IKE menu you can change items such as service intervals frequency (i.e.
mi/km until next service), etc
LCM
Options: To enable or disable your DRL: -select "coding
data" -toggle the options for "running lights"
NOTICE
This diagnostic device will work perfectly if
your BMW's electrical system is in healthy operating condition. Only the
software provided can be used with this unit. No guarantees can be made that
this unit along with any other device will fix or repair a vehicle that has
been wrecked, burned, modified, or flooded. We are not held liable for any
misuse of this device that may have caused problems to your vehicle. Professional
support may be needed if your vehicle suffers from electronic glitches.
PA Soft BMW Scanner 1.4
·
Software Version:
V1.4.0. Works with Windows 7, 8, Vista and Windows 10.
·
Save hundreds of
dollars by diagnosing your own car.
·
Turn on/off daytime
running lights, program EWS, EEPROM, remove old keys etc.
·
Supports E36, E38,
E39, E46, E53, E83, E85 chassis
·
[1992-1999 3-Series]
[1999-2006 3-Series] [1996-2003 5-Series] [ 1995-2001 7-Series] [2000-2006 X5]
[E83 X3] [E85 Z4]. **Will have less features/functionality on pre-1998 BMW’s.
·
Top notch version of
BMW Scanner 1.4 Diagnostic OBD2/OBD II tool for large range of E Chassis BMW’s
·
Pins 7 & 8 are
pre-soldered
Description:
Operating systems:
Windows XP, Windows 7, Windows 8, Windows Vista, Windows 10
Functions:
Determine chassis,
stored mileage values, model, VIN, Installed features and Equpment.
Searching of all units,
attribute modification of several modules:
Reading and saving in
files:
Copying ZCS (IKE - EWS)
and FA (IKE - LCM) coding and other functions in various units
"Unlocked"
functions to show possibilities of full version:
Package includes: