FMUSER FBE300 Magicoder Video Transcoder  Media Plex

Hardware Transcoding


Features:

– Small size and easy to carry.

– It is the only transcoding device that integrates encoding, decoding and transcoding functions on the market.

– Selectable video and audio simultaneous output or single audio output.

– Supports the integration of two streams of video into one picture, which is output by IP stream and HDMI.

– Supports simultaneous transcoding of two video streams, RTMP
streaming to video platforms, streaming media servers or third-party
software such as YouTube, fackbook, Wowza, FMS, Ustream, Nginx, VLC,
vMix, NVR, etc.

– Freely convert video encoding format, resolution and protocol to reduce bandwidth usage.

– Precise frame rate control, no frame loss in real time, low latency.

– Supports converting video files to HDMI or IP streaming output from USB storage devices.

– Support CBR/VBR code stream control.

– Support web page setting parameters and support multiple language switching.

– Each machine passes the strict aging test before leaving the
factory, and the aging process is 72 hours of continuous full load.

– Low power supply design with less than 6W power consumption; optional Micro USB interface / DC 12V power supply.

– Brings the operation fault recovery function, it will automatically restart when it detects that the operation is not normal.

– Support one key to restore factory settings.


Appearance

Front Panel:

①USB Input/Output ②3.5mm Stereo Audio Line in  ③HDMI Video Out  ④Reset to Factory ⑤RJ45 Ethernet


Rear Panel:

①Micro-USB power in 5V  ②DC Power in 12V



Resolution Conversion

By reducing video resolution, this solution can provide
low-resolution video for slow Internet users. For example: FBE300
transcoder can convert 1080i@50fps video to 1080p@30fps, 720p@25fps or
480p@25fps, and push it to live platform or streaming server, so it can
reduce bandwidth usage.

Encoding Format Conversion

This solution can improve the usage of broadband and
improve device compatibility by converting the encoding format to the
most popular formats like MPEG-4, H.264, H.265.  For example: FBE300
converts MPEG2 format which commonly used in broadcast television
set-top boxes to H.265 video and AAC audio (the most popular code)
streams, and stream them to live platforms or streaming servers.

At the same level of clarity, MPEG-4, H.264 and H.265 use lower bandwidth than MPEG-2, and compatibility is higher than MPEG-2.

Code Stream Compression

By reducing video streams, this solution can provide low-stream video for slow Internet users.

For example, the FBE300 transcoder can convert 8Mbps
video to 2Mbps and stream it to the live platform or streaming server to
reduce the bandwidth usage.


Multi-Screen Multi-Protocol

This solution can be applied to different scenarios. The
FBE300 transcoder supports simultaneous output of RTMP, RTSP, HTTP-TS
and M3U8 streams . It can adapt to different streaming modes, such as
live broadcast, on-demand and broadcasting etc.

Multi-Screen Multi-Resolution

This solution is mostly used to meet the resolution
requirements of different screens like TVs, notebooks and mobile phones.
The FBE300 transcoder can output HDMI, network streams,  and this two
streams support different resolutions for output. This can be viewed on
different size screens to reduce the usage of bandwidth and reduce
buffering, so that to improve video viewing speed.

USB to Network Stream

This solution is used to push video files to web
platform. The FBE300 transcoder converts video files from a USB flash
drive to an IP video stream, then transmit to different locations via
different protocols.

Network Stream to USB File

This solution can be used for personal network video download,
program recording, monitor playback etc. The network stream video can be
converted into a video file and stored in a USB flash drive for later
program video replay or rebroadcast.

Internet Audio Transmission

This solution enables long-distance audio network transmission by
using the FBE200 encoder and the FBE300 transcoder, which is commonly
used for audio transmission between the studio room and the transmitter
tower. The audio program source is streamed to the audio service via the
FBE200 encoder , and decoded by the FBE300 into a lossless audio output
to the transmitter.

Screen in Screen

This scheme is used to combine two IP stream videos into one video.
The FBE300 can combine two IP streaming videos into one video according
to the compositing method and screen size you want, and output them via
IP and HDMI.


Two In and Two Out

This scheme is used to simultaneously transcode two IP
streaming videos. The FBE300 can simultaneously convert two IP stream
videos into the resolution, encoding format, and stream size transfer
protocol you want.


Outdoor Advertising Screen Application

This solution enables long-range wireless transmission
by using the FBE200 encoder and the FBE300 decoder. The commercial
advertisement

program source is streamed to the network by the FBE200
encoder, and decoded by the FBE300 into a high-definition video output
to the outdoor advertising screen.


iOS Dedicated Video Protocol HLS

This solution is used to solve different protocol
compatibility problems of different devices. FBE300 can convert MPEG-2,
MPEG-4, H.264, H.265 protocol video streams into iOS system specific HLS
protocols to meet the needs of different users.

Application Field:

–Telecom Operators

–Surveillance System

–Video Recording

–Digital Signage Advertising

–Digital TV program Transmission

–Digital TV Broadcasting System Set Top Box

–The Head End System of the Digital TV Branch Network

–The Edge of the Digital TV Backbone

–Hotel TV System

–CATV Broadcasting System

–IPTV and OTT Front-end Systems

–Video Conference

–Replace HD video Capture Card

–Live Broadcasting

–Teaching / Campus Broadcasting

–Recording System

–NVR, Network Video Recorder

–DVD Player

–Personal Video Download

–TV Station

–FM Radio Station

AS HDMI Decodera

Parameters:


NO.

Item

Parameter

1

Input protocol

Support RTSP, RTP/UDP multicast, RTP/UDP unicast, HTTP, standard TS stream, RTMP pull stream, HLS (m3u8) protocol, etc.

2

Output protocol

Support RTSP, RTP/UDP multicast, RTP/UDP unicast, HTTP,
standard TS stream, RTMP push stream, RTMP pull stream, HLS (m3u8)
protocol, etc.

3

Input resolution

Supports up to 3840×2160 resolution input and is backward compatible with all resolution inputs

4

Output resolution

Supports up to 1920×1080 resolution output and supports all standard resolution outputs down

5

Video decoding

Support H.265/H.264, MPEGII and other mainstream video decoding

6

Video coding

Support H.264 encoding algorithm, output stream support 50k bps to 12M bps adjustable

7

Audio decoding

Support AAC-LC, AAC-HE, MP3, MP2 and other audio decoding

8

Audio sample rate

Support 44.1K Hz, 48K Hz and other adaptive sources, support resampling

9

Audio coding

Support AAC-LC, AAC-HE, MP3, MP2, etc., code rate 48k bps to 256k bps adjustable

10

HDMI output

Compatible with HDMI 1.4a HD signal interface, support for decoding output

11

Audio output

3.5mm audio output interface, support 3.5mm audio line output

12

Network Interface

RJ45 100M network interface Supports simultaneous video stream input and output

13

USB interface

USB3.0 interface, support for external USB flash drive or mobile hard drive

14

LED indicator

Power indicator (red) and network cable connection status light (green)

15

Input voltage

DC 12V

16

Working environment

Working temperature: 0-40 °C Operating humidity: less than 95%


























Packing List:

1PC FBE300 transcoder

1PC Power Adapter

1PC HDMI cable

1PC Audio Line