Squeeg's Kustoms / Squeeg's Hot Rod Connection
Antique Green Gloss Top Coat Kit
Contains: 1 Quart of Antique Green Epoxy Finish Coat, 1 Quart of Gloss Epoxy Catalyst, & 1 Quart of Epoxy Reducer.
Epoxy Top Coat Kits
Squeeg's top coat kits have no UV agent similar to the old DP epoxy from PPG. The idea behind the colors is a temporary coating before paint, so you can run it for a few years until you are ready for paint. When you are ready for paint, simply sand and do all of your paint work on top of it the same as you would over primer. Most other suede top coats on the market are made from either urethane or enamel and should be stripped off before applying paint. The clear is designed to cover and seal porous or sanded metals for a natural metal look or to protect and retain the natural patina look that is so popular. Also, just like our primer, the unmixed components have an indefinite shelf life. Available in a quart kit that yields three sprayable quarts or a gallon kit that yields three sprayable gallons.
NOTICE: Not legal for sale or use in CA, CT, DE, IL, IN, MA, MD, ME, NH, NJ, NY, OH, PA, RI, VA or VT.
We cannot, under any circumstances, ship to these states.
ANY AND ALL ORDERS PLACED FROM ANY OF THESE STATES CAN NOT BE SHIPPED AND THE ORDER WILL BE CANCELLED. MUST BE SHIPPED VIA GROUND. CAN ONLY BE SHIPPED WITHIN THE CONTINENTAL UNITED STATES.
All of our products are proudly 100% made in the U.S.A. Our products are original designs meant to fill a void in the market, not just a copy of something already being offered. We have been using these parts for years in the shop on the cars we drive and build at Squeeg’s Kustoms.
Also available from Squeeg’s Hot Rod Connection
Epoxy Primer Filler Kits: Looking for the good stuff you used to use? Our legendary Epoxy Primer is still available! The same stuff we’ve been using in the shop for decades is still available.
Aluminum Ferrules: A unique alternative to simply using a rubber grommet when routing lines, cables, wires, etc. through any panel. Deep enough to run through frame rails or can be used on thin sheet metal panels. 5 sizes available.
Bulkheads: Currently 5 items consisting of an aluminum bolt-on brake line bulkhead and 4 steel weld-in frame bulkheads to run lines or wiring through your frame. Weld in bulkheads available with a plain removable plate or with two terminals perfect for running wiring from your battery to your starter.
Epoxy Top Coat Kits: 18 Colors and Clear Available in Gloss or Suede, Squeeg's top coat kits have no UV agent similar to the old DP epoxy from PPG. The idea behind the colors is a temporary coating before paint, so you can run it for a few years until you are ready for paint. When you are ready for paint, simply sand and do all of your paint work on top of it the same as you would over primer. Most other suede top coats on the market are made from either urethane or enamel and should be stripped off before applying paint. The clear is designed to cover and seal porous or sanded metals for a natural metal look or to protect and retain the natural patina look that is so popular. Also, just like our primer, the unmixed components have an indefinite shelf life. Available in a quart kit that yields three sprayable quarts or a gallon kit that yields three sprayable gallons.
Exhaust Tips: Beautiful brushed stainless steel exhaust tips flared at the ends designed to be welded on. Available for 2”, 2-1/2” & 3” exhaust.
Line Separators & Mounts: Black anodized aluminum line separators and NEW black nylon line separators and mounts for Fuel Line, Oil Line, Heater Line & A/C Line – including the new EZ-Clip A/C Line. Separators for two, three or four lines available in all popular configurations. An innovative design where the lines simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Matching Plug Wire Separators also available.
Pewter Key Chains: Based on original artwork by Jimmy Smith of cars built by Squeeg’s Kustoms. 6 designs available; 32 Ford Coupe, 33 Ford Roadster, 34 Ford Coupe, 36 Ford Coupe, 40 Ford Coupe, and 50 Merc Custom.
Plug Wire Separators: Black anodized aluminum and NEW black nylon separators for plug wires. Just like our Line Separators, the wires simply clip in to make installation and future servicing a snap with no fiddly hardware to lose. Aluminum offered in 8mm and 8.5mm and Nylon offered in 7mm, 8mm and 8.5mm. There kits for Big Block Chevy, Small Block Chevy, Small Block Ford, Big Block Ford, and Small Block Chrysler. Also available are the individual components so customers can build their own kits. The wire mounts are sold two per pack and the floating separators four per kit. NEW nylon shorty and 90 degree mounts as well.
Steering Wheels, Adapters & Spacer: Cast aluminum drilled I Beam style perfect for early hot rods. Available as cast or polished, wrapped or unwrapped. 4 configurations currently offered. Two column adapters available: early Ford (1928-48) keyed columns and GM splined columns as well as an Aluminum ½” spacer.
T-Shirts: Several styles available featuring artwork by Jimmy Smith in sizes through 3XL. Many clearance shirts are available in various colors as well as Women’s shirts.
Wheels: Early Sprint Car style classic aluminum wheels. Available in Starburst for Ford spindle mount 15” x 4.5”, Sprint in sizes from 15” x 4.5” through 16” x 10”, and Champs in sizes from 16” x 11” through 16” x 13”. All wheels are made to order. Standard available bolt patterns 5 on 4 ½”, 5 on 4 ¾” and 5 on 5 ½”. Other bolt patterns are available, contact us for more information.
Wheel Center Caps: Cast aluminum caps designed to match cast wheels. Originally designed for American Rebel wheels, but suitable for many other wheels. Made in flat or with a domed center. Available as cast or polished in 5 on 4 ½”, 5 on 4 ¾” and 5 on 5 ½” bolt patterns.