TruaCuT by Richard Stanley Pty. Ltd.

Suppliers to the Australian Hardware industry for over 65 years.

Tungsten Carbide 12.7mm Straight 1/2shk

HIGH PERFORMANCE Series out last conventional bit over 3 times

TM1412.7HP     (RRP $45.95) OUR PRICE only $39.90

-Diameter  12.7mm

-Cutting Depth  30mm

-Shank  12.7mm (1/2")

OTHERS available.....................

Straight - Two flutes

(1/2") 12.7 x 38mm shank Used for general routing,  grooving etc.Bottom of the bit is ground for general plunging then normal side cutting. Remember that a 1/2" shk bit is no stronger that of the narrowest section of the bit. eg. A 6mm dia. TM1406 (1/2"shk) bit is generally no stronger than the same size with 1/4" shank. But a 12mm dia. bit with 1/2" shk. has a longercut and is stronger than the 1/4" shk. Bit. Extra long cut bits (X/L cut) are ideal for use in Router benches when trimming or planning the edge of timber instead of using your power plane. This planning method makes sure you plane your job square to the main surface.

We use Australia Post with tracking for you peice of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

We use Australia Post with tracking for you peace of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

WHY BUY TruaCuT Router Bits?

The Stanley family, through various entities, have been supplying quality cutting tools for the machine of a wide range of material for more than 60 years in Australia and throughout the world.

       Geometric Designed for Industry

Based on decades of field testing and continual improvement has earned for Stanley TruaCut products, a reputation for reliability and quality second to none.

        Anti-Kickback

All TruaCuT shaped router bits incorporate this very

important feature. The reason for this is that with the old style bits, have a tendency to kickback at you when the job comes  into initial contact with the router bit. This kickback could cause serious injury to you.

Shear, Hook & Clearance Angles

These angles can differ from bit to bit depending upon the complexity of the shape. The Shear angle is measured from the axis of the bit. This is generally a positive, continuous slant angled cutting edge which shear cuts smoothly rather than have a one chop cut by the full form, straight cutting edge with each revolutionary pass. The Hook angle is measured from a line passing through the centre to the outside diameter of the bit. This hook angle on the face of the bit hooks under the shaving, helping to sever the waste smoothly.  The Clearance is the angle at the back

of the full form on the outside diameter of the bit. Too greater clearance causes the bit to blunten quickly but too little clearance will cause the rear of the tip to drag on the surface of the job thus burning the surface.  These angles must be all correct in conjunction with each other so as to give a Router bit that will cut clean and smooth producing a professional finish like a TruaCuT Router

Bit does for you.

Material & Production

TruaCuT Router bits are machined from  High Quality Steel. During the turning, milling and

brazing process many quality control checks are performed. We believe that the finished Router bit is no better than the foundation process. As material is removed from the steel in the turning and milling process there is a need to stress relieve the tool. Also during the brazing of the Tungsten Carbide tips there is stress build up due to the fact that expansion and contraction rates of steel

as to tungsten carbide is quite different. Thus the need for tightly controlled rate of temperature reduction.

Tungsten Carbide Tips.

TruaCuT use a Premium Grade micro grain tungsten carbide. Amongst other qualities this allows for a mirror like finish and sharp tougher cutting edge to be produced giving a longer cutting life when machining very hard materials.

TruaCuT by Richard Stanley Pty. Ltd.

Suppliers to the Australian Hardware industry for over 65 years.

Tungsten Carbide 12.7mm Straight 1/2shk

HIGH PERFORMANCE Series out last conventional bit over 3 times

TM1412.7HP     (RRP $39.95) OUR PRICE only $32.90

-Diameter  12.7mm

-Cutting Depth  30mm

-Shank  12.7mm (1/2")

OTHERS available.....................

Straight - Two flutes

(1/2") 12.7 x 38mm shank Used for general routing,  grooving etc.Bottom of the bit is ground for general plunging then normal side cutting. Remember that a 1/2" shk bit is no stronger that of the narrowest section of the bit. eg. A 6mm dia. TM1406 (1/2"shk) bit is generally no stronger than the same size with 1/4" shank. But a 12mm dia. bit with 1/2" shk. has a longercut and is stronger than the 1/4" shk. Bit. Extra long cut bits (X/L cut) are ideal for use in Router benches when trimming or planning the edge of timber instead of using your power plane. This planning method makes sure you plane your job square to the main surface.

We use Australia Post with tracking for you peice of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

We use Australia Post with tracking for you peace of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

WHY BUY TruaCuT Router Bits?

The Stanley family, through various entities, have been supplying quality cutting tools for the machine of a wide range of material for more than 60 years in Australia and throughout the world.

       Geometric Designed for Industry

Based on decades of field testing and continual improvement has earned for Stanley TruaCut products, a reputation for reliability and quality second to none.

        Anti-Kickback

All TruaCuT shaped router bits incorporate this very

important feature. The reason for this is that with the old style bits, have a tendency to kickback at you when the job comes  into initial contact with the router bit. This kickback could cause serious injury to you.

Shear, Hook & Clearance Angles

These angles can differ from bit to bit depending upon the complexity of the shape. The Shear angle is measured from the axis of the bit. This is generally a positive, continuous slant angled cutting edge which shear cuts smoothly rather than have a one chop cut by the full form, straight cutting edge with each revolutionary pass. The Hook angle is measured from a line passing through the centre to the outside diameter of the bit. This hook angle on the face of the bit hooks under the shaving, helping to sever the waste smoothly.  The Clearance is the angle at the back

of the full form on the outside diameter of the bit. Too greater clearance causes the bit to blunten quickly but too little clearance will cause the rear of the tip to drag on the surface of the job thus burning the surface.  These angles must be all correct in conjunction with each other so as to give a Router bit that will cut clean and smooth producing a professional finish like a TruaCuT Router

Bit does for you.

Material & Production

TruaCuT Router bits are machined from  High Quality Steel. During the turning, milling and

brazing process many quality control checks are performed. We believe that the finished Router bit is no better than the foundation process. As material is removed from the steel in the turning and milling process there is a need to stress relieve the tool. Also during the brazing of the Tungsten Carbide tips there is stress build up due to the fact that expansion and contraction rates of steel

as to tungsten carbide is quite different. Thus the need for tightly controlled rate of temperature reduction.

Tungsten Carbide Tips.

TruaCuT use a Premium Grade micro grain tungsten carbide. Amongst other qualities this allows for a mirror like finish and sharp tougher cutting edge to be produced giving a longer cutting life when machining very hard materials.

TruaCuT by Richard Stanley Pty. Ltd.

Suppliers to the Australian Hardware industry for over 65 years.

Tungsten Carbide 12.7mm Straight 1/2shk

HIGH PERFORMANCE Series out last conventional bit over 3 times

TM1412.7HP     (RRP $39.95) OUR PRICE only $32.90

-Diameter  12.7mm

-Cutting Depth  30mm

-Shank  12.7mm (1/2")

OTHERS available.....................

Straight - Two flutes

(1/2") 12.7 x 38mm shank Used for general routing,  grooving etc.Bottom of the bit is ground for general plunging then normal side cutting. Remember that a 1/2" shk bit is no stronger that of the narrowest section of the bit. eg. A 6mm dia. TM1406 (1/2"shk) bit is generally no stronger than the same size with 1/4" shank. But a 12mm dia. bit with 1/2" shk. has a longercut and is stronger than the 1/4" shk. Bit. Extra long cut bits (X/L cut) are ideal for use in Router benches when trimming or planning the edge of timber instead of using your power plane. This planning method makes sure you plane your job square to the main surface.

We use Australia Post with tracking for you peice of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

We use Australia Post with tracking for you peace of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

WHY BUY TruaCuT Router Bits?

The Stanley family, through various entities, have been supplying quality cutting tools for the machine of a wide range of material for more than 60 years in Australia and throughout the world.

       Geometric Designed for Industry

Based on decades of field testing and continual improvement has earned for Stanley TruaCut products, a reputation for reliability and quality second to none.

        Anti-Kickback

All TruaCuT shaped router bits incorporate this very

important feature. The reason for this is that with the old style bits, have a tendency to kickback at you when the job comes  into initial contact with the router bit. This kickback could cause serious injury to you.

Shear, Hook & Clearance Angles

These angles can differ from bit to bit depending upon the complexity of the shape. The Shear angle is measured from the axis of the bit. This is generally a positive, continuous slant angled cutting edge which shear cuts smoothly rather than have a one chop cut by the full form, straight cutting edge with each revolutionary pass. The Hook angle is measured from a line passing through the centre to the outside diameter of the bit. This hook angle on the face of the bit hooks under the shaving, helping to sever the waste smoothly.  The Clearance is the angle at the back

of the full form on the outside diameter of the bit. Too greater clearance causes the bit to blunten quickly but too little clearance will cause the rear of the tip to drag on the surface of the job thus burning the surface.  These angles must be all correct in conjunction with each other so as to give a Router bit that will cut clean and smooth producing a professional finish like a TruaCuT Router

Bit does for you.

Material & Production

TruaCuT Router bits are machined from  High Quality Steel. During the turning, milling and

brazing process many quality control checks are performed. We believe that the finished Router bit is no better than the foundation process. As material is removed from the steel in the turning and milling process there is a need to stress relieve the tool. Also during the brazing of the Tungsten Carbide tips there is stress build up due to the fact that expansion and contraction rates of steel

as to tungsten carbide is quite different. Thus the need for tightly controlled rate of temperature reduction.

Tungsten Carbide Tips.

TruaCuT use a Premium Grade micro grain tungsten carbide. Amongst other qualities this allows for a mirror like finish and sharp tougher cutting edge to be produced giving a longer cutting life when machining very hard materials.

TruaCuT by Richard Stanley Pty. Ltd.

Suppliers to the Australian Hardware industry for over 65 years.

Tungsten Carbide 12.7mm Straight 1/2shk

HIGH PERFORMANCE Series out last conventional bit over 3 times

TM1412.7HP     (RRP $39.95) OUR PRICE only $32.90

-Diameter  12.7mm

-Cutting Depth  30mm

-Shank  12.7mm (1/2")

OTHERS available.....................

Straight - Two flutes

(1/2") 12.7 x 38mm shank Used for general routing,  grooving etc.Bottom of the bit is ground for general plunging then normal side cutting. Remember that a 1/2" shk bit is no stronger that of the narrowest section of the bit. eg. A 6mm dia. TM1406 (1/2"shk) bit is generally no stronger than the same size with 1/4" shank. But a 12mm dia. bit with 1/2" shk. has a longercut and is stronger than the 1/4" shk. Bit. Extra long cut bits (X/L cut) are ideal for use in Router benches when trimming or planning the edge of timber instead of using your power plane. This planning method makes sure you plane your job square to the main surface.

We use Australia Post with tracking for you peice of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

We use Australia Post with tracking for you peace of mind.

All purchases (Auction or Buy-Now) are to be paid for with in 7 days.

Please contact us for combined discounted Postage rate.

WHY BUY TruaCuT Router Bits?

The Stanley family, through various entities, have been supplying quality cutting tools for the machine of a wide range of material for more than 60 years in Australia and throughout the world.

       Geometric Designed for Industry

Based on decades of field testing and continual improvement has earned for Stanley TruaCut products, a reputation for reliability and quality second to none.

        Anti-Kickback

All TruaCuT shaped router bits incorporate this very

important feature. The reason for this is that with the old style bits, have a tendency to kickback at you when the job comes  into initial contact with the router bit. This kickback could cause serious injury to you.

Shear, Hook & Clearance Angles

These angles can differ from bit to bit depending upon the complexity of the shape. The Shear angle is measured from the axis of the bit. This is generally a positive, continuous slant angled cutting edge which shear cuts smoothly rather than have a one chop cut by the full form, straight cutting edge with each revolutionary pass. The Hook angle is measured from a line passing through the centre to the outside diameter of the bit. This hook angle on the face of the bit hooks under the shaving, helping to sever the waste smoothly.  The Clearance is the angle at the back

of the full form on the outside diameter of the bit. Too greater clearance causes the bit to blunten quickly but too little clearance will cause the rear of the tip to drag on the surface of the job thus burning the surface.  These angles must be all correct in conjunction with each other so as to give a Router bit that will cut clean and smooth producing a professional finish like a TruaCuT Router

Bit does for you.

Material & Production

TruaCuT Router bits are machined from  High Quality Steel. During the turning, milling and

brazing process many quality control checks are performed. We believe that the finished Router bit is no better than the foundation process. As material is removed from the steel in the turning and milling process there is a need to stress relieve the tool. Also during the brazing of the Tungsten Carbide tips there is stress build up due to the fact that expansion and contraction rates of steel

as to tungsten carbide is quite different. Thus the need for tightly controlled rate of temperature reduction.

Tungsten Carbide Tips.

TruaCuT use a Premium Grade micro grain tungsten carbide. Amongst other qualities this allows for a mirror like finish and sharp tougher cutting edge to be produced giving a longer cutting life when machining very hard materials.